[quagga-users 14598] CPU xeon all Cores 100% ospf

Fernando Galvão <fernando-7aHeYhnDPMRwFqzsTH5u/[email protected]>
Newsgroups gmane.network.quagga.user
Message-ID <[email protected]>
> 
> Friends,
> 
> This is my first toll.
> 
> We're leaving mikrotik as a pppoe server. We are testing debian 8 64bits with the configuration that I will inform below.
> 
> We are running quagga with IP summarization, accel-ppp and ipv6.
> 
> We have 3,000 pppoe sessions. The problem is that the cpu gets from 6% to 9% and suddenly it goes on for a few seconds to 90% to 100% dropping the accel-ppp dropping all users and then back to normal.
> 
> What can I do to improve? These peaks are with large intervals, sometimes 3 hours pass to happen.
> 
> Server Configuration:
> 
> 
> Xeon v3 3.4ghz 8MB quad core
> 32GB ddr3 1600MHZ
> 2x 3TB SAS 6GB / s raid 1 via off-board controller Intel 1GB cache.
> 8 gigabit intel ports but we are only using 4 making 2GB / s LACP bonding for WAN and 2GB for LAN.
> 
> Spending on average 1.1GB and 1.5GB / s of traffic at peak times. Traffic is not the problem because today happened with 500MB of traffic.
> 
> 
> 
> Fernando Galvão
>   Wantel Telecom
> +55 87 3866-5200
> 
> 
>

_______________________________________________
Quagga-users mailing list
Quagga-users-UOy77sIEA+cAd7ICUelF/[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.