[quagga-users 14876] Re: Quagga query

Hi Michael,

Thanks for your help.

If I don't do bridge from virtual box and do it from Ubuntu CLI prompt i.e
install bridge-utils, then edit  in /etc/sysconfig/network scripts and set
ip address and restart brtcl services, will it work or both are different
things.

Please let me know after done with bridge networking, how I will verify that
its working fine. 

Thanks a lot!!!

Thanks 
Pardeep

-----Original Message-----
From: quagga-users-bounces-UOy77sIEA+cAd7ICUelF/[email protected]
[mailto:quagga-users-bounces-UOy77sIEA+cAd7ICUelF/[email protected]] On Behalf Of Michael H
Lambert
Sent: Monday, November 27, 2017 10:31 PM
To: Quagga Users <quagga-users-UOy77sIEA+cAd7ICUelF/[email protected]>
Subject: [quagga-users 14875] Re: Quagga query

Hi Pardeep,

> On 27 Nov 2017, at 09:52, Pardeep <[email protected]> wrote:
> 
> Thanks for your prompt response. 
> 
> As I am doing it first time, so I am not much aware its IOS interface. Can
you please help me to how to check if Ubuntu VM is using bridge networking
or NAT networking and If its uses NAT networking then how to shift to bridge
networking ? 

If you are using VirtualBox on the VM server, you can configure the guest
with "Bridged Adapter" to make it bridge to the NIC. You might also be able
to use "Host-only Adapter" if you have an extra NIC in the VM server.  If
you're using another virtualization platform, sorry, I'm not familiar with
it.

Michael


_______________________________________________
Quagga-users mailing list
Quagga-users-UOy77sIEA+cAd7ICUelF/[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-users