Re: [rancid] Ubiquiti edgeswitch (edgemax) script?

I have a few of the edge switches (edgeswitch-X)

I use this in my etc/rancid.types.conf

# Ubiquiti Switches and some radios
ubntsw;script;rancid -t ubntsw
ubntsw;login;ulogin
ubntsw;module;ubnt
ubntsw;inloop;ubnt::inloop
ubntsw;command;ubnt::ShowVersion;show version
ubntsw;command;ubnt::ShowConfig;show configuration

I have my own ulogin, but it looks like your login that you are
currently using works just fine.

Basically, there are only 2 commands that matter, the show version and
show configuration.

I contributed by lib/rancid/ubnt.pl back a couple of years ago, but
can't remember if it made it in. There may be a more recent way to do
it, but I'm happy to share it.



On 11/6/2018 1:13 PM, Kevin Geil wrote:
>
> Hi, IÂ’m trying to get RANCID to poll my ubiquiti edge switches, and am
> a bit perplexed.  From what I’ve found online in other mailing lists,
> it is possible to use RANCID to poll these, using the edgemax script.
> So far, I’ve set up the router.db with <device-type> edgemax.  When I
> invoke rancid-run, nothing much happens, and when I look in the log, I
> see:
>
> =====================================
>
> Getting missed routers: round 2.
>
> myEdgeSwitch: End of run not found
>
> !
>
> =====================================
>
>  
>
> So far, I have tried adding my own device type by copying the
> “EdgeMax” device config in rancid.types.base to rancid.types.conf, and
> calling it EdgeSwitch (which is the right thing to do right? Despite
> the dire warnings at the top of each file, itÂ’s not entirely clear how
> to do this, as they both warn against editing the file).  I tried to
> use ulogin instead of clogin, with the same result.
> I can successfully  authenticate to the switches by using both clogin
> and ulogin.
>
>  
>
>
> What is now really confusing is that I donÂ’t know what script RANCID
> should be running.  In rancid.types.base, the edgemax config looks
> like this:
>
>  
>
> ## UBNT EdgeMAX
>
> edgemax;script;rancid -t edgemax
>
> edgemax;login;clogin
>
> edgemax;module;edgemax
>
> Â…more commandsÂ…
>
>
> What confuses me is that there isnÂ’t a script in the bin directory
> called edgemax, so I’m not sure what script it should be running. 
> There IS a file in lib/rancid called edgemax.pm, but that doesnÂ’t get
> referenced by the config in rancid.types.base.
>
>
> If someone could help clarify
>
>  
>
> 1. What “end of run not found” means to me, and
>
> 2. What script the edgemax config should be running, I might be able
> to figure this all out. 
>
>
> Thank you.
>
>  
>
> Kevin
>
>
>
> _______________________________________________
> Rancid-discuss mailing list
> [email protected]
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss

-- 
Doug Hughes
Keystone NAP
Fairless Hills, PA
1.844.KEYBLOCK (539.2562)

_______________________________________________
Rancid-discuss mailing list
[email protected]
http://www.shrubbery.net/mailman/listinfo/rancid-discuss