Re: [rancid] [SPAM?] Cisco NX "chatty" with Power info

Hi,

Thanks for responding..

This is:

Software
  BIOS: version 07.59
  NXOS: version 7.0(3)I7(3)
  BIOS compile time:  08/26/2016
  NXOS image file is: bootflash:///nxos.7.0.3.I7.3.bin
  NXOS compile time:  2/12/2018 13:00:00 [02/12/2018 19:13:48]


Hardware
  cisco Nexus9000 C93120TX Chassis
  Intel(R) Core(TM) i3- CPU @ 2.50GHz with 16400992 kB of memory.

Thanks for your help!



On Thu, Jun 27, 2019 at 5:01 AM Vacheslav Zouhairy <[email protected]>
wrote:

> what model of nexus is this?
>
> On Thu, 2019-06-27 at 00:07 -0400, FF wrote:
>
>
> ok,
>
> So upgraded to 3.9 with the same behavior.
>
> Built a cisco-nxp personality that had an | exclude OK line on it to
> remove the wattage line... but suddenly rancid couldn't log in to those
> units.
> Even though clogin would work fine. Went and modified the cisco-nx
> definition... but the exclude is ignored.
>
> So now 2.3 and 3.9 behave identically in this situation...
>
> This is the whole output for the section in question:
>
> Index: configs/10.10.10.114
>
> ===================================================================
>
> retrieving revision 1.1157
>
> diff -u -4 -r1.1157 10.10.10.114
>
> @@ -80,10 +80,10 @@
>
>   !Env: Power                              Actual        Total
>
>   !Env: Supply    Model                    Input      Capacity
> Status
>
>   !Env:                                    (Watts )     (Watts )
>
>   !Env: -------  ----------  ---------------  ------  ----------
> --------------------
>
> - !Env: 1        N9K-PAC-1200W-B                     192 W      1200 W
> Ok
>
> - !Env: 2        N9K-PAC-1200W-B                     174 W      1200 W
> Ok
>
> + !Env: 1        N9K-PAC-1200W-B                     190 W      1200 W
> Ok
>
> + !Env: 2        N9K-PAC-1200W-B                     176 W      1200 W
> Ok
>
>   !Env: Power Usage Summary:
>
>   !Env: --------------------
>
>   !Env: Power Supply redundancy mode (configured)
> PS-Redundant
>
>   !Env: Power Supply redundancy mode (operational)
> PS-Redundant
>
> Any suggestions?
>
> Thanks in advance!
>
>
>
> On Mon, Mar 11, 2019 at 5:02 PM FF <[email protected]> wrote:
>
> Apparently I'm running a massively old version (2.3.8). I'll try upgrading
> to 3.9 first.
>
> thanks in advance
>
> On Mon, Mar 11, 2019 at 4:47 PM heasley <[email protected]> wrote:
>
> Fri, Mar 08, 2019 at 07:06:45PM +0000, Nick Nauwelaerts:
> > what version of rancid & nx-os are you running?
>
> good question.
>
> if the answer is 3.9, please show us the complete output of show
> environment power
>
> > i notice you only have 1 column less as me, you seem to miss "actual
> output".
> >
> >
> > // nick
> >
> >
> >
> >
> > From: Rancid-discuss [mailto:[email protected]] On
> Behalf Of FF
> > Sent: Friday, March 8, 2019 18:05
> > To: [email protected]
> > Subject: [SPAM?] [rancid] Cisco NX "chatty" with Power info
> >
> >
> > !Env: Power                              Actual        Total
> >
> >   !Env: Supply    Model                    Input      Capacity
>  Status
> >
> >   !Env:                                    (Watts )     (Watts )
> >
> >   !Env: -------  ----------  ---------------  ------  ----------
> --------------------
> >
> > - !Env: 1        N9K-PAC-1200W-B                     180 W      1200 W
>     Ok
> >
> > + !Env: 1        N9K-PAC-1200W-B                     182 W      1200 W
>     Ok
> >
> >   !Env: 2        N9K-PAC-1200W-B                     162 W      1200 W
>     Ok
> >
> >   !Env: Power Usage Summary:
> >
> > Every time Rancid runs, we get erroneous reports because the power usage
> fluctuates by 1-2 watts per run. Any suggestions on how to keep the good
> information (availability, etc) without getting this level of detail?
> >
> > thanks in advance!
> >
> >
> > --
> > FF
> >
> > ________________________________
> >
> > Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV> | Twitter<
> https://twitter.com/aquafinnv> | YouTube<
> http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee> |
> LinkedIN<http://www.linkedin.com/company/aquafin/products> | Instagram<
> https://www.instagram.com/aquafin_nv/>
> >
> > In het kader van de uitoefening van onze taken verzamelen we bij Aquafin
> persoonsgegevens. Hoe we omgaan met deze gegevens en wat de rechten van de
> betrokkenen zijn, kan je nalezen in onze privacy policy<
> https://www.aquafin.be/nl-be/privacy-policy>.
> >
> >   P Denk aan het milieu. Druk deze mail niet onnodig af.
>
> > _______________________________________________
> > Rancid-discuss mailing list
> > [email protected]
> > http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
>
>
> --
> FF
>
>
>
> _______________________________________________
>
> Rancid-discuss mailing list
>
> [email protected]
>
>
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>
>
>

-- 
FF

_______________________________________________
Rancid-discuss mailing list
[email protected]
http://www.shrubbery.net/mailman/listinfo/rancid-discuss