Auth failiure
Anders Östling via samba <[email protected]> Fri, 13 Mar 2026 10:04:44 +0100
| Newsgroups | gmane.network.samba.general |
|---|---|
| Message-ID | <CAP4+ddPKjhxJDbAfwEfF5=WPzp92SMxn_H=fbCjmU6MWcGbPwQ@mail.gmail.com> |
Hi We have an industrial robot with an older Linux version that (suddenly) cant connect to the network share where the control files are stored. The server is set to NT1 auth due to the fact that the robot does not support SMB2 or higher. The robot has a GUI where we enter SERVER, SHARE, FOLDER, DOMAIN, USER and PASSWORD. No error message when the connection fails. If we use the *same connection and credential details* on another Linux or Windows workstation, then the connection works as expected. 1. From the robot/workstation log on member server [2026/03/11 11:15:39.127782, 3] source3/auth/auth.c:202(auth_check_ntlm_password) auth_check_ntlm_password: check_ntlm_password: Checking password for unmapped user [HPX]\[bock]@[ROBOMAC-213-TF-514826] with the new password interface [2026/03/11 11:15:39.127788, 3] source3/auth/auth.c:208 (auth_check_ntlm_password) auth_check_ntlm_password: check_ntlm_password: mapped user is: [HPX]\[bock]@[ROBOMAC-213-TF-514826] 2. Log on DC [2026/03/11 11:15:39.137306, 2] auth/auth_log.c:860(log_authentication_event_human_readable) Auth: [SamLogon,network] user [HPX]\[bock] at [Wed, 11 Mar 2026 11:15:39.137289 CET] with [NTLMv1] status [NT_STATUS_WRONG_PASSWORD] workstation [\\\\ROBOMAC-213-TF-514826] remote host [ipv4:10.0.2.11:50678] mapped to [HPX]\[bock]. local host [ipv4:10.0.2.15:49152] NETLOGON computer [HP-SRV03$] trust account [HP-SRV03$] 3. On member server [2026/03/11 11:15:39.160820, 5] source3/auth/auth.c:265(auth_check_ntlm_password) auth_check_ntlm_password: winbind authentication for user [bock] FAILED with error NT_STATUS_WRONG_PASSWORD, authoritative=1 [2026/03/11 11:15:39.160838, 2] source3/auth/auth.c:353(auth_check_ntlm_password) check_ntlm_password: Authentication for user [bock] -> [bock] FAILED with error NT_STATUS_WRONG_PASSWORD, authoritative=1 Where do I go from here? I was thinking of installing tcpdump on the member server to get a complete network trace dump. I should also mention that this has worked in the past. Don't know when it ceased to work though. -- ------ -------------------- 8 ------------------ ------ IT truism: "A permanent solution is a temporary solution that works so well that noone want to replace it." Anders Östling +46 768 716 165 (Mobil) -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba