Re: Spread - network adapters

Ed Holyat <[email protected]> Wed, 12 Mar 2014 16:31:06 -0400
Newsgroups gmane.network.spread.user
Message-ID <648AFB5742D6394FB956DC606975560561D93DCBC0@OLFANDEXCH01.andover.olf.com>
Lane, the configuration is good.  Does spread have any udp ports open on the backup lan, is it possible the backup lan ports are from tcp client connections?


From: Lane Matthew [mailto:[email protected]]
Sent: Wednesday, March 12, 2014 12:25 PM
To: [email protected]
Subject: [Spread-users] Spread - network adapters

Hi,

Would appreciate some assistance.

I have spread running on 4 servers with the following config :-

# Datacenter Application Servers
Spread_Segment  10.151.141.255:14803  {
        VPRDAPPNOS08 10.151.140.236
        VPRDAPPNOS09 10.151.140.237
        VPRDAPPMAC12 10.151.140.234
        VPRDAPPMAC13 10.151.140.235}

On each of my servers I have 2 networks (the primary and the backup lan).

Windows IP Configuration

Ethernet adapter Backup Lan:

   Connection-specific DNS Suffix  . :
   IPv4 Address. . . . . . . . . . . : 10.82.54.237
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
  Default Gateway . . . . . . . . . :

Ethernet adapter Primary Lan:

   Connection-specific DNS Suffix  . : primary.int
   IPv4 Address. . . . . . . . . . . : 10.151.140.237
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.151.140.6


Looking at netstat, I see many ports open by SPREAD on the both the primary and backup LAN. Is this expected? I do not need any connections on the backup LAN. Can the network adaptor be specified in the config file?

Matthew Lane
+44 7595 020684
ETS Environments and Release

111 Buckingham Palace Road
London

Guimardstraat 1A, rue Guimard
BE-1040 Brussel/Bruxelles

Visit our website : www.eni.com/be<http://www.eni.com/be>
[cid:[email protected]]before printing this message, think about the environment


------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Message for the recipient only, if received in error, please notify the sender and read http://www.eni.com/disclaimer/

_______________________________________________
Spread-users mailing list
[email protected]
http://lists.spread.org/mailman/listinfo/spread-users
image001.jpg (image/jpeg, 712 B) - not displayed