Stunnel 5.44 client syntax to accept connections on pty?
Martin Got <[email protected]> Wed, 17 Apr 2019 16:43:34 +0000
| Newsgroups | gmane.network.stunnel.user,gmane.os.openbsd.misc |
|---|---|
| Message-ID | <IO9sAr_PNUQEELZysFXky8x1mpPO_r7bBlHI0NlEneJclRliVaLsqaWu3kYM_M76RuLDqshMMmS3AVon3aThA0xtlS6yUFHtCY3aIRZ0fX4=@protonmail.com> |
How to use 'stunnel' in client mode to accept connections on pty from local programs like 'ppp' instead of 'accept=IP:PORT'? 'pty = yes' seems work in server mode only, so when I removed 'accept = 127.0.0.1:1723' from 'stunnel' client config I'm getting the error: [!] Service [ppp]: Each service must define two endpoints on stunnel-5.44 I need to call 'stunnel' client from 'pppd' and communicate with 'stunnel' using pty if it was possible by using a command: pppd /dev/ptyp3 10.0.1.2: local debug noauth passive noccp novj novjccomp nopcomp noaccomp name ppp-client connect 'stunnel /etc/stunnel/stunnel-client.conf' Both 'pppd' and 'stunnel' started by executing the command above, but 'pppd' can't communicate to 'stunnel' server using pty. Please advice. [ppp] client = yes accept = [127.0.0.1:1723 ](http://127.0.0.1:1723) ^^^^^^^^^^^^^^^^^^^^^^^ connect = STUNNEL-SERVER-IP:723 CAfile = /etc/stunnel/ca.crt cert = /etc/stunnel/client.crt key = /etc/stunnel/client.key verifyChain = yes checkHost = hostna.me ;checkIP = 1.2.3.4 _______________________________________________ stunnel-users mailing list [email protected] https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users