Re: Change desktop when remote connection is established

Don't know about scripted install.  I have never tried it.  I believe 
you need an IP range.

*Patrick Shoaf*
IT Special Projects
[email protected] <mailto:[email protected]>

*Model Cleaners, Uniforms & Apparel
Model Ohio Enterprises dba The Fussy Cleaners*
100 Third Street
Charleroi, PA 15022
Direct Dial: 724-565-2033
724-489-4386 Fax
www.modelcleaners.com <http://www.modelcleaners.com>
www.modelapparel.com <http://www.modelapparel.com>
www.modeluniforms.com <http://www.modeluniforms.com>
www.thefussycleaners.com <http://www.thefussycleaners.com>

On 8/30/2016 5:01 PM, Randy Dover wrote:
>
> Thanks, again.
>
> I remember seeing that section. Can I set that through a scripted 
> install (pushing the msi file)?
>
> Do I HAVE to include the IP ranges?
>
> Randy Dover
>
> *From:*Patrick Shoaf [mailto:[email protected]]
> *Sent:* Tuesday, August 30, 2016 4:57 PM
> *To:* Randy Dover <[email protected]>; 
> [email protected]
> *Subject:* Re: Change desktop when remote connection is established
>
> If they are at the desk and see the message, they can allow or deny 
> the access.  If they do not choose, the default option set happens.  
> (IE "Allow" or "Deny" depending on config settings).  This is 
> controlled by "Accept connection on timeout" or "Deny connection on 
> timeout".
>
> *Patrick Shoaf*
> IT Special Projects
> [email protected] <mailto:[email protected]>
>
> *Model Cleaners, Uniforms & Apparel
> Model Ohio Enterprises dba The Fussy Cleaners*
> 100 Third Street
> Charleroi, PA 15022
> Direct Dial: 724-565-2033
> 724-489-4386 Fax
> www.modelcleaners.com <http://www.modelcleaners.com>
> www.modelapparel.com <http://www.modelapparel.com>
> www.modeluniforms.com <http://www.modeluniforms.com>
> www.thefussycleaners.com <http://www.thefussycleaners.com>
>
> On 8/30/2016 4:41 PM, Randy Dover wrote:
>
>     Patrick,
>
>     Thank you for your reply!
>
>     What happens if they aren’t at their desk or don’t reply? I’m
>     thinking of instances where they may not even be logged on to the
>     computer. If the action is set to query, and no one is there, what
>     happens?
>
>     Randy Dover
>
>
>     *From:*Patrick Shoaf [mailto:[email protected]]
>     *Sent:* Tuesday, August 30, 2016 3:59 PM
>     *To:* [email protected]
>     <mailto:[email protected]>
>     *Subject:* Re: Change desktop when remote connection is established
>
>     There is one way I know to to A) Notify users and B) allow
>     unattended access.  (This is available in Win ver 2.7.10.) From
>     the Access Control Tab on the Server Configuration, Set the IP
>     Range up and use "Action = Query" with at least a 10 second time
>     time out and "Accept connection on timeout". This way the user is
>     notified as long as they are at their computer.
>
>     *Patrick Shoaf*
>     IT Special Projects
>     [email protected] <mailto:[email protected]>
>
>     *Model Cleaners, Uniforms & Apparel
>     Model Ohio Enterprises dba The Fussy Cleaners*
>     100 Third Street
>     Charleroi, PA 15022
>     Direct Dial: 724-565-2033
>     724-489-4386 Fax
>     www.modelcleaners.com <http://www.modelcleaners.com>
>     www.modelapparel.com <http://www.modelapparel.com>
>     www.modeluniforms.com <http://www.modeluniforms.com>
>     www.thefussycleaners.com <http://www.thefussycleaners.com>
>
>     On 8/30/2016 10:17 AM, Randy Dover wrote:
>
>         I work for a financial institution and we are audited on a regular basis.
>
>         A concern has been raised about having TightVNC installed, that IT may "snoop" on end users without their knowledge.
>
>         I know the systray icon changes upon connect, but I doubt that will be good enough for some of our users, plus I have currently chosen to hide the icon.
>
>         I have looked on the mailing lists and didn't find what I'm looking for, probably due to putting in the wrong words and getting way too many hits.
>
>         What I would like to do is have the desktop change in some way, I am currently choosing to hide the background, but if a user has windows open, then they wouldn't see that.
>
>         Is there a way to force the desktop background to black (yes I know, they still may not see that) upon connect, then back to whatever color it was before connection?
>
>         Is there a way to force the desktop to be displayed in "basic" mode? WebEx or another remote tool does this, to preserve bandwidth and make screen refresh faster.
>
>         I've searched on TightVNC's site, plus the mailing list site, plus "TightVNC for Windows: Installing from MSI Packages" and "TightVNC for Windows: Installation and Getting Started" but didn't see what I'm looking for.
>
>         I will be installing by pushing the MSI through a script, so having the commands to put in the script will be a big help.
>
>           
>
>         Thank you all in advance!
>
>           
>
>         Randy Dover
>
>         This email is intended for its designated recipients. The information, and attachments, contained in this email may be considered private and/or confidential. If the transmission is received in error, delete messages(s) from your system and notify the sender. You may not, directly or indirectly, use, disclose or distribute any part of this email.
>
>           
>
>         ------------------------------------------------------------------------------
>
>         ___________________________________________________________
>
>         TightVNC mailing list,[email protected]
>         <mailto:[email protected]>
>
>         To change your subscription or to UNSUBSCRIBE, please visit
>
>         https://lists.sourceforge.net/lists/listinfo/vnc-tight-list
>
>           
>
>
>     This email is intended for its designated recipients. The
>     information, and attachments, contained in this email may be
>     considered private and/or confidential. If the transmission is
>     received in error, delete messages(s) from your system and notify
>     the sender. You may not, directly or indirectly, use, disclose or
>     distribute any part of this email.
>
>     This email is intended for its designated recipients. The
>     information, and attachments, contained in this email may be
>     considered private and/or confidential. If the transmission is
>     received in error, delete messages(s) from your system and notify
>     the sender. You may not, directly or indirectly, use, disclose or
>     distribute any part of this email.
>
>
> This email is intended for its designated recipients. The information, 
> and attachments, contained in this email may be considered private 
> and/or confidential. If the transmission is received in error, delete 
> messages(s) from your system and notify the sender. You may not, 
> directly or indirectly, use, disclose or distribute any part of this 
> email.
>
> This email is intended for its designated recipients. The information, 
> and attachments, contained in this email may be considered private 
> and/or confidential. If the transmission is received in error, delete 
> messages(s) from your system and notify the sender. You may not, 
> directly or indirectly, use, disclose or distribute any part of this 
> email.

------------------------------------------------------------------------------

___________________________________________________________
TightVNC mailing list, [email protected]
To change your subscription or to UNSUBSCRIBE, please visit
https://lists.sourceforge.net/lists/listinfo/vnc-tight-list

begin:vcard
fn:Patrick Shoaf
n:Shoaf;Patrick
org:Model Cleaners Uniforms & Apparel;IT Dept
adr:;;100 Third Street;Charleroi;PA;15022;USA
email;internet:[email protected]
title:IT Manager
tel;work:724-565-2033
tel;fax:724-565-2110
tel;cell:724-366-9154
x-mozilla-html:TRUE
url:http://www.modelcleaners.com
version:2.1
end:vcard