Re: rogue access point detection
"Brian Riley (maillist)" <[email protected]>
| Newsgroups | gmane.network.wireless.bay-area |
|---|---|
| Message-ID | <BD6E87C8.5D7E%[email protected]> |
Remember the only thing a ³GPS enabled² sniffer/stumbler program does is to make note of the GPS coordinates of your location at the moment of the greatest signal strength it has recorded for that access point. That is all it does. You could be hundreds of feet from the site. There is nothing easy about it! Your best bet is multiple passes from different directions until you have it Bracketed, then average the GPS coordinates. Even then there are so many variables you will still be down to some serious snooping/educated guessing! Cheers ... BBR On 9/7/04 7:24 PM, "Larry Mateo" <[email protected]> wrote: > Hello, Is there a product where it is GPS-enabled so that rogue AP¹s can be > easily located? I am currently using Sniffer Technologies Netasyst WLX > Wireless. _______________________________________________ BAWUG's general wireless chat mailing list [unsubscribe] http://lists.bawug.org/mailman/listinfo/wireless