Can WAP11 wirelessly extend network?

I am trying to extend the range of my wireless network, but I'm not 
sure if I have it correct.  I found this list while looking around for 
a clear answer to what I hope are clear questions.

Background:
	I have an Airport Extreme unit (home) and a Linksys BEFW11S4 (work)

	I recently found a WAP11 and wondered if it could be used to extend 
the wireless networks I already have into areas where there is no wired 
connection to the network.

	FYI the BEFW11S4 has firmware 1.45.7, Oct 8 2003, and a Linksys WAP11 
has firmware 1.4i.1.

	I put the WAP11 on the same channel with the same SSID as the Airport 
Extreme.  I put the WAP11 into "Wireless Bridge" mode (both point to 
point with the MAC address of the A.Extreme and point to multipoint).  
It did not seem to have any effect on the network range.

Questions:

1) can the WAP11 expand the network even w/o being plugged into another 
Ethernet port?

2) am I correct that the SSIDs and the channel should be the same?

3) under "AP Mode" I assume the WAP11 should be "Wireless Bridge" and 
preferably "Point to Point" with the Remote MAC Address entered.

4) the WAP11 asks for an IP.  Our network is 192.168.1.x (work) and 
192.168.2.x (home)so I assume I just choose an open IP and assign it 
manually on that same subnet.

	Thanks for any help

		TjL

_______________________________________________
BAWUG's general wireless chat mailing list
[unsubscribe] http://lists.bawug.org/mailman/listinfo/wireless