Re: PCI 802.11b w/NetBSD 1.6

At Tue, 28 Jan 2003 22:05:27 -0600,
David Young <[email protected]> wrote:
> 
> Try setting WI_TIMEOUT in wireg.h to 100000.

I tried with 100000, 200000 and 400000 but the timeout still happens. :-(




> On Wed, Jan 29, 2003 at 11:53:46AM +0900, Shingo WATANABE / ?$BEOJU ?$B?-8c wrote:
> > At Mon, 27 Jan 2003 10:18:29 -0600,
> > David Young <[email protected]> wrote:
> > 
> > > A lot of people report this problem. I am not able to reproduce it,
> > > myself. Maybe it is because I test on much slower computers.
> > > 
> > > Be sure that you are using the latest ic/wi.c (1.109) and pci/if_wi_pci.c
> > > (1.16), since I have recently fixed bugs in both.
> > 
> > I got the latest code (wi.c:1.109, if_wi_pci.c:1.16) from anonymous
> > cvs and compiled new kernel.  Unfortunately it has still problem when
> > I try to send data on it. :-(
> > 
> > 
> > % uname -a
> > NetBSD think.nabechan.org 1.6M NetBSD 1.6M (X30) #24: Tue Jan 28 23:30:40 JST 2003     [email protected]:/sys/arch/i386/compile/X30 i386
> > 
> > 
> > % dmesg | grep wi0
> > wi0 at pci1 dev 2 function 0: Intersil Prism2.5 Wireless Lan
> > wi0: interrupting at irq 11
> > wi0: 802.11 address 00:05:3c:06:32:c9
> > wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
> > wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
> > wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> > wi0: command timed out, cmd=0x10b, arg=0x127
> > wi0: xmit failed
> > wi0: timeout in wi_seek to 13c/0
> > wi0: timeout in wi_seek to 13c/0
> > wi0: timeout in wi_seek to 13c/0
> > wi0: timeout in wi_seek to 13c/0
> > wi0: timeout in wi_seek to 13c/0
> > wi0: timeout in wi_seek to 13c/0
> 
> -- 
> David Young             OJC Technologies
> [email protected]      Engineering from the Right Brain
>                         Urbana, IL * (217) 278-3933
--
*bsd wireless list, a bawug thing <http://www.bawug.org/>
[un]subscribe: http://lists.bawug.org/mailman/listinfo/bsd-wireless/