[CUWiN] circular route

Hello,

I have the following setup:
(internet)--(Router A)--<LAN A>--(Node A)~~~(Node Z)--<LAN Z>

- Router A provides DHCP for LAN A
- Node Z provides DHCP for LAN Z
- A computer on LAN A has a static route for LAN Z pointing to Node A'a
  address on LAN A.

I can ping from computesr on LAN Z to LAN A, but trying to do the
opposite, pinging form LAN A to LAN Z seems to reveal a circular route
somewhere. Any ideas how I could start troubleshooting this?



i.e.:

Node A = 192.168.42.22, on 192.168.42.0/24, internet/dhcp from linksys rtr
Node Z = 10.216.103.254, on 10.216.103.0/24, dhcp from cuw node

mylaptop_on_A$ sudo route add -net 10.216.103.0/24 gw 192.168.42.22

mylaptop_on_A$ ping 10.216.103.252
PING 10.216.103.252 (10.216.103.252) 56(84) bytes of data.
64 bytes from 192.168.42.22: icmp_seq=1 ttl=62 time=7.12 ms
64 bytes from 192.168.42.22: icmp_seq=2 ttl=62 time=4.37 ms
64 bytes from 192.168.42.22: icmp_seq=2 ttl=62 time=4.37 ms

mylaptop_on_A$ traceroute 10.216.103.252
traceroute to 10.216.103.252 (10.216.103.252), 30 hops max, 38 byte packets
 1  192.168.42.22 (192.168.42.22)  0.686 ms  0.554 ms  0.509 ms
 2  192.168.42.22 (192.168.42.22)  2.618 ms  2.381 ms  3.008 ms
 3  * * *


Cheers,
Simon P. Ditner
_______________________________________________
CU-Wireless mailing list
[email protected]
http://lists.chambana.net/cgi-bin/listinfo/cu-wireless
Project Page: http://cuwireless.ucimc.org