Re: WDS for WRT54G

At 07:22 PM 9/7/2005 -0400, Leonard heinz wrote:
>Hi,
>
>I was wondering if the v1 of the WRT54G would support a WDS repeater 
>function? If yes, would it need the Sveasoft firmware for that or might 
>there be a way to use it with the regular firmware?
>
>I'm trying to have the Linksys as the main router, and then a Motorola 
>WR850G as a WDS repeater in another area. It seems that the WR850G has this 
>ability, but I'm not sure how it could get working with the Linksys...
>
>Thanks,
>Lenny

All the WRT54G and WRT54GS routers support WDS; whether you can use it
depends entirely on the firmware you have loaded.  I use a WRT54G v1.0
connected in WDS mode to a WRT54G v2.0, both with 3rd party firmware.
Linksysinfo.org is a good source of info on the various firmware options
available for each version of the router, and it also has some good forums
for each firmware.

_______________________________________________
Dev mailing list
[email protected]
http://seattlewireless.net/mailman/listinfo/dev