RE: (no subject)

"Devin McBride" <[email protected]>
Newsgroups gmane.network.wireless.seattle.general
Message-ID <[email protected]>
Sorry...one last email...This also from SW page...

"Note: The mercury version is for non US markets where only 100mW of power is allowed and will be branded Senao. Engenius dealers will be selling the 200mW versions for use in the US."

Grabbed from post which I pasted below...looks like it is EnGenius site you should be looking to for this.

--------------------------------------------------------
UPDATE - 09Jul2004 - Beware of the Prism3 chipset 

Some of the new Senao 2511 cards are now built around the Prism3 chipset, this one, though newer, has less sensitivity (weaker than a Orinoco card/Hermes chipset). Furthemore, some of the Linux drivers may be fooled by the new chipset and won't let your run Kismet. - I own both prism 2.5 and 3 cards. For the prism3 i had to add an entry for "manfid: 0x000b, 0x7100" in hostap_cs.conf, then hostap driver worked fine in all modes. 

Look yourself for the specs (only true for the "Mercury" version): 

http://www.senao.com/english/product/product_wireless01_outdoor_1.asp?pgtl=Wireless&tp1id=02&tp2id=03&proid=000071 

Note: The mercury version is for non US markets where only 100mW of power is allowed and will be branded Senao. Engenius dealers will be selling the 200mW versions for use in the US. 


2.2 Rebadged Versions of SenaoSenao type cards are typically sold under the following brand names: 

Senao SL-2511CD PLUS, SL-2511CD PLUS EXT2 
Engenius EL-2511CD, EL-2511CD EXT 
Macsense AeroCard? Plus (model WPE-700) 
Surf & Sip 
SonicWALL Long Range Wireless Card
--------------------------------------------------------

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Yitaoding
Sent: Thursday, June 09, 2005 10:30 AM
To: SeattleWireless Talk List
Subject: RE: (no subject)


 But i've heard that the MERCURY version of the Senao has a Prism3 chipset.
So i think that it must be different, because the normal Senao has the
Prism2.5 chipset. But i'll try. the problem ist that i'll buy 4 of these
cards.if it won't work then i've a problem.


> --- Ursprüngliche Nachricht ---
> Von: "Devin McBride" <[email protected]>
> An: "SeattleWireless Talk List" <[email protected]>
> Betreff: RE: (no subject)
> Datum: Thu, 9 Jun 2005 09:57:12 -0700
> 
> I was unable to find anything on hacking that specific card...BUT...
> 
> That looks strikingly similar, if not identical to EnGenius
> Technologies' 2511cd+ EXT2
> (http://datacom.engeniustech.com/products_detail.php?name=21&cat=Network
> %20Interface%20Card)
> 
> If I were in your spot, I might just try EnGenius's drivers and give
> that a shot as their card supposedly is a 200mw high-output card...
> 
> Driver Download: 
> http://datacom.engeniustech.com/admin/pAssocItem/2511CD_PLUS_EXT2_ver802
> .zip
> 
> Devin
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Yitaoding
> Sent: Thursday, June 09, 2005 9:18 AM
> To: [email protected]
> Subject: (no subject)
> 
> Hi, does anybody know how i can flash my Senao 2511cd+ EXT2 MERCURY with
> 100mW to a 200mW one?
> 
> -- 
> Weitersagen: GMX DSL-Flatrates mit Tempo-Garantie!
> Ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl
> _______________________________________________
> Talk mailing list
> [email protected]
> http://seattlewireless.net/mailman/listinfo/talk
> _______________________________________________
> Talk mailing list
> [email protected]
> http://seattlewireless.net/mailman/listinfo/talk
> 

-- 
Weitersagen: GMX DSL-Flatrates mit Tempo-Garantie!
Ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl
_______________________________________________
Talk mailing list
[email protected]
http://seattlewireless.net/mailman/listinfo/talk
_______________________________________________
Talk mailing list
[email protected]
http://seattlewireless.net/mailman/listinfo/talk
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.