TFTP syntax for Actiontec
"M" <[email protected]>
| Newsgroups | gmane.network.wireless.seattle.general |
|---|---|
| Message-ID | <[email protected]> |
Hi What tried so far re. TFTP syntax for Actiontec This is to save gateway custom setups externally. I have two, maybe three gateways at locations not quite within available LOS of each other. There are numerous steps to enable the most effective access and security settings I could find. I'm thinking it could be simpler to have 'em all configured the same (but for their broadband username and password), and externally save their /dev/ticfg as config.xml in case. Firmware Both my gateways say Model: GT701-WG | F/W: 3.60.1.0.4.1 on a small sticker on their undersides. My replacement CD says Installation CD | Ver.1.3.8 | Model# GT701-wg | P.N. 0410-0103-006 Firmware Recovery QW04-3.60.2.0.6.3* Original CD with slightly older gateway says Installation CD | Ver.1.3 | [No line with model] | P.N. 0410-0103-003 Firmware Recovery QW04-3.60.1.0.4.1 Before typing in commands, I'd like to confirm that I'm on the right track (going in the right direction : )` Binary mode FTP with ADAM2 instead of TFTP? ( TFTP per http://www.seattlewireless.net/index.cgi/ActiontecGT701 ) My Ethernet connections are running Win98 or Win98SE, so what syntax? Session quotes: > Telnet BusyBox on dslmodem login: admin. Password: BusyBox v0.61.pre (2005.04.22-01:13+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. # cat /dev/ticfg > /var/tmp/config.xxx # cd /var/tmp # tftp -l config.xxx -p BusyBox v0.61.pre (2005.04.22-01:13+0000) multi-call binary Usage: tftp [OPTION]... HOST [PORT] # > Various permutations of the tftp command return the same result. tFTPD32 (with Telnet connection remaining open, otherwise tFTPD32 makes no response to input)]: > Server interfaces box 192.168.0.02 Tftp Client tab Host 192.168.0.1 File config.xxx Port 23 > Click [Get] button "Timeout waiting Block #1" Wrote empty file. > Port [blank (default tftp port 69/udp)] Click [Get] button "Timeout waiting Block #1" Wrote empty file. > Port 69 Click [Get] button "Timeout waiting Block #1" Wrote empty file. SolarWinds.net TFTP Server Searched help; syntax and setup parmameters not found (I think this is for SysAdmin). Suggestions, leads, clues would be welcome. Sorry this is so long, I've tried to be clear. Thank you -oT _____ * Calling Qwest Tech Support on a related topic, a tech rep said the CD version differences should not matter. However, it is my understanding that, in general, mixing versions, even said to be backwards compatible, might work only with well-written sofware. So in this troubleshooting, does this matter, or should I use the older CD, or do I need to update the firmware? _______________________________________________ Talk mailing list [email protected] http://seattlewireless.net/mailman/listinfo/talk