Re: Link from Ballard to Shoreline?

Another option would be to get some 'dry copper'  from the phone company to
connect your two end points.  This is very similar to what they provide for
home security ciruits a dedicated phone line that connects you to the
security company.  It takes alot of talking from what I understand to get
the phone company to understand what your asking for unless you get lucky.
But its doable.  Once you have that you can set up your own endpoint devices
and get up to 10Mbps depending on the hardware you use.  And its relativly
cheap since once the endpoint devices are paid for your reoccuring cost is
only electricity and the relatively cheap price of the dedicated phone line.

-Patrick

On 8/4/06, Gary <[email protected]> wrote:
>
> Tom Marshall wrote:
>
> > Any solution will have to be at least DVD quality. The video is shown on
> > 30-foot and 45-foot screens. I don't know the projector resolution off
> > the top of my head though.
>
> The average bit rate for DVD is 4-5 Mbps (max is 9.8) but it would be
> inefficient to stream MPEG-2. If you want a projectable image, you're not
> going to need 6 Mbps up and down. Someone else suggested H.264 but I've
> found that even crufty old H.323 offers sufficient quality to display on a
> large screen TV (40+ inches). Some testing with larger screens would be
> required, however. You could save yourself a lot of time and money by
> first finding an individual or company that specializes in streaming video
> before you overbuy on bandwidth. If you want to do it on your own, check
> out some of the lower end gear by Linksys and D-Link then compare them
> with Polycom or Axis Communications, etc.
>
> -Gary
> _______________________________________________
> Talk mailing list
> [email protected]
> http://seattlewireless.net/mailman/listinfo/talk
>

_______________________________________________
Talk mailing list
[email protected]
http://seattlewireless.net/mailman/listinfo/talk