Re: offtopic: Experience with Yaggi antenna for GSM-900Mhz

Some time ago, Seattlewireless TV had that video about a user who made
a relay point at someone's location.  In return for them providing
power and a safe location for the gear and antenna, they were able to
use the connection.  Thus, no passive relay point was needed.  Or is
my memory faulty about that video?

On 2/6/09, Didnt Zen <[email protected]> wrote:
> Hi All,
>
> Many thanks for all your ideas and reference documents,
> If, at the end, I can finish this project successfully, I will share the
> details here in the list !
>
> Regards,
> David.-
>
> 2009/2/4 Gary <[email protected]>
>
>> Casey Halverson wrote:
>>
>>> The carrier is terminating your traffic and providing you
>>> a service.  It still costs money to take incoming traffic, operate the
>>> millions of VPN tunnels, and switch it in and out of the PSTN.
>>
>>
>> Now you have me wondering...
>>
>> I assume that most femtocell installs would be for rural customers but how
>> about an installation in a sparsely populated area like a small town where
>> the carrier only has coverage along the main highway and the femtocell is
>> installed on the edge of their coverage... If a femtocell is only capable
>> of
>> carrying a limited number of connections, what's to prevent nearby
>> customers
>> of the same carrier connecting through your base station and tying up all
>> available time slots because it's got a stronger signal than the nearest
>> cell site? Do they have a tunable range or ACLs so the neighbors aren't
>> constantly hogging it?
>>
>> -Gary
>>
>> >
>>
>
> >
>


-- 
Online readable news and headlines at:  http://news.google.com

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the SeattleWireless Talk list, hosted by Google Groups
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/swn-talk?hl=en

For more about the SeattleWireless.NET project, see http://seattlewireless.net/
-~----------~----~----~----~------~----~------~--~---