[zebra 22954] Re: FW: Multple Router simaulation on single machine
"Atiqur Rahman Mohammed" <[email protected]>
| Newsgroups | gmane.network.zebra |
|---|---|
| Message-ID | <[email protected]> |
Can you kindly guide how to establish ospf adjacency between two virtual routers on a Linux machine with single NIC.? Regards, Atiqur Rahman Mohammed Software Engineer Velankani Software Pvt. Ltd. 43, Electronic City, Phase -II, Hosur Road, Bangalore - 560 100. India. Direct: +91 80 66145319 Mobile: 09343867164 Fax: +91 80 66145303 E-mail: [email protected] URL: www.velankani.com "Every Customer is a Reference Customer" -----Original Message----- From: Lauro, John [mailto:[email protected]] Sent: Friday, August 04, 2006 2:08 PM To: Atiqur Rahman Mohammed; [email protected] Subject: RE: [zebra 22952] FW: Multple Router simaulation on single machine You can have multiple internal virtual networks and use virtual internal NICs between the VMs, and you can also use VLAN tagging to have a single NIC connect to multiple networks from a single physical interface if it's supported by the switch. _____ From: [email protected] [mailto:[email protected]] On Behalf Of Atiqur Rahman Mohammed Sent: Friday, August 04, 2006 2:45 AM To: [email protected] Subject: [zebra 22952] FW: Multple Router simaulation on single machine Hi, We have installed two instances of zebra 0.94 on a single Linux machine with VMWare application. The Linux machine has single network interface card. We are interested in testing OSPFv2. We have configured the interface card with two different IP addresses for two different virtual Linux machine. Moreover Linux machine is connected to Layer 2 switch. Is it possible to establish ospf adjacency between the two routers running on the same Linux machine with single interface card? If possible can anyone guide me how to achieve this? Regards, Atiqur Rahman Mohammed Software Engineer _______________________________________________ Zebra mailing list [email protected] http://ml.zebra.org/mailman/listinfo/zebra