[zebra 23001] OSPF session establishment

Hello,
  We have 2 machines with zmpls on them and two interface cards each.
m/c 1 has addresses as :-> eth0 192.68.105.1 eth1 :- 3.0.0.236
m/c 2 has addresses as  :-> eth0 192.68.105.2 eth1 :- 3.0.0.239

eth0 of m/c 1 was connected with eth0 of m/c 2 with cross cable.

we expected that OSPF session should get established but there was no
session established ...

here are conf files for zebra ->
m/c 1 :

interface eth0
 ip address 192.168.105.1/16
 mpls ip
 multicast

m/c 2 :

interface eth0
 ip address 192.168.105.2/16
 mpls ip
 multicast

=======================================================

here is the configuration file for ospf :-
m/c 1 :=>
interface eth0
  ip ospf hello-interval 10
  router ospf
ospf router-id 192.168.105.1
network 192.168.0.0/16 area 0.0.0.0
neighbor 192.168.105.1

m/c 2 :=>
interface eth0
  ip ospf hello-interval 10
  router ospf
ospf router-id 192.168.105.2
network 192.168.0.0/16 area 0.0.0.0
neighbor 192.168.105.2

plz help us as soon as possible...
we are trying this for abt 2 months............so ........

with regards,
prachi

_______________________________________________
Zebra mailing list
[email protected]
http://ml.zebra.org/mailman/listinfo/zebra