[zebra 23017] not able to ping

HI
I am new to zebra and routing.
i wanted to convert my linux system to router, so installed the zebra software and configured.
this linux has 2 NIC. I started zebra and ospf daemons after the configuration,
in my test setup i have connected each NIC of the router to separate hubs.
and to each hub i have connected one more linux test machine.

so in my test set up i have 3 machine and 2 hubs.(One router and 2 test machines)
with this setup i am not able to ping the machine in one network to other.
i get "network not reachable" error.


My configuration files looks like as mentioned below

zebra.conf

hostname test
password test
enable password test
!
interface lo
!
interface eth0
ip address 192.168.1.1/24
interface eth1
ip address 192.168.2.1/24

ip route 0.0.0.0/0 192.168.1.254
ip route 192.168.2.0/24 192.168.2.254


________________
ospf.conf


router ospf
network 192.168.1.0/24 area 0
network 192.168.2.0/24 area 0


the test machine have the ip address as 192.168.1.3 and 192.168.2.3
with this set up i am not able to ping 192.168.1.3 from 192.168.2.3
i have enabled ip forwarding in all the machines.

Is something wrong with my configuration?Can some one please help me .....


TIA
Rajiv

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com