[zebra 23117] Re: BGP routes can't publish!

Damn I thought I tried multi in my config already.

Looks much different now.

Sh ip bgp pa:

[0x865cfd8:137274] (142) 4323 1273 4651 4621
[0x8683828:104508] (1) 4323 10931
[0x827f6b0:71753] (2) 4323 14131
[0x8601880:530494] (7) 4323 1257 8437 8926 8926 8926 8926 8926 15836
8474
[0x8519770:202824] (3) 4323 1273 4651 4621 3839
[0x8248fb0:71756] (4) 4323 5400 9498
[0x8294ec8:71757] (1) 4323 15155
[0x86dbcc8:104530] (1) 4323 16563
[0x82e37d0:71764] (1) 4323 16947
[0x8279438:104531] (1) 4323 16819
[0x828ca30:104540] (1) 4323 19123
[0x8703b10:170089] (2) 4323 1273 21433
[0x83bff78:432228] (1) 4323 1273 1273 1273 1273 5588 3340 8425
[0x8551160:137328] (2) 4323 3300 21070
[0x8486bd0:235632] (1) 4323 5400 5400 5400 12883 12294 12294 12294 12294
12294 21488 43774
[0x849dbc0:170100] (2) 4323 13237 34088 43731


sh ip bgp scan:

BGP scan is running
BGP scan interval is 60
Current BGP nexthop cache:
 [TW Router IP] valid [IGP metric 0]
BGP connected route:
 192.168.173.0/24

Sh ip bgp:

*> 204.134.104.0/21 [TW Router IP]                          0 4323 2901
2901 2901 2901 2901 i
*> 204.134.112.0/20 [TW Router IP]                          0 4323 2901
2901 2901 2901 2901 i
*> 204.134.128.0    [TW Router IP]                         0 4323 293
10702 i
*> 204.134.129.0    [TW Router IP]                         0 4323 293
292 i
*> 204.134.131.0    [TW Router IP]                         0 4323 293
10702 i
*> 204.134.132.0    [TW Router IP]                         0 4323 293
10702 i
*> 204.134.133.0    [TW Router IP]                         0 4323 293
10702 i
*> 204.134.135.0    [TW Router IP]                         0 4323 293
10702 i
*> 204.134.136.0    [TW Router IP]                         0 4323 293
10702 i




I'm now getting the routes ok
But the main sending route problem exists, TW doesn't see anything
coming from me at all.
They see the keepalives but nothing else?
And I need the route to go from TW to my firewall not my actual Zebra
router? Is that possible.


Sorry for the simple questions (I promise to order a bgp book tomorrow)



-----Original Message-----
From: Arnold Nipper [mailto:[email protected]] 
Sent: Friday, February 15, 2008 6:48 PM
To: Charles Robinson
Cc: '[email protected]'
Subject: Re: [zebra 23115] BGP routes can't publish!

On 15.02.2008 22:07 Charles Robinson wrote

> I'm not sure if I should be using multihop 

Did you try to set multihop? If not, please do. If so, what was the
result?




Arnold
-- 
Arnold Nipper / nIPper consulting, Sandhausen, Germany
email: [email protected]       phone: +49 6224 9259 299
mobile: +49 172 2650958         fax: +49 6224 9259 333


This e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately.