[zebra 23130] Re: Develop routing protocol

Hi

Developing a routing protocol is a big task but it does give you a
real good experience and it takes years to develop a routing protocol
from scratch with all the latest features. however what i could
suggest you is take the Quagga Code and look into some protocol eg
(RIP/OSPF/BGP) and start understanding the code and try adding
features to it . There are lot of features required to be added in
Quagga's implementation of BGP so if you are interested in that BGP
could be a real good place to start off however make sure you
understand how BGP works (RFC 1771 / RFC 4271) should be the starting
point.

Hope this helps

Cheers
Balaji

On 5/7/08, Danish Khan <[email protected]> wrote:
> Hello
>
>  I am searching about how to develop routing protocol in Linux. I am
>  looking around for some time but not fully convinced, and unable to find
>  any website. I found Zerba similar to my requirement but not entirely
>  sure. Any help would be highly appreciated.
>
>  Danish
>
>
>  _______________________________________________
>  Zebra mailing list
>  [email protected]
>  http://ml.zebra.org/mailman/listinfo/zebra
>