RE: mixmasters Digest, Vol 30, Issue 2

"Bill Dodds" <[email protected]>
Newsgroups gmane.org.clubs.gobiodiesel.mixmasters
Message-ID <[email protected]>
Seth, A thousand pardons amigo. I feel guilty for not participating. Indeed Nancy Bob and Felix are carring the ball, without assistance. They have my appology's. I tried to contact you (Seth) a couple days back reguarding the service of my truck. It's up and running and Im willing to press it into service. I will require some compensation for the fuel used. But I will offer it's use as a donation to the CO-OP.

I am striding along with my own Processor. I have built a unit on an old PU Truck lumber rack. It's on 'lil' hard rubber wheels and I can push it round my shop. put diamond plate on the upper deck of the platform to hold a couple of 55/Drums. Purchaced a shorty Water heater 47 gal. to go on deck below. I took an old stainless tripple sink on the top deck to filter grease from the back deck of my cab/over into the processor unit. It will have three different filter sizes, so that I can clean up the product before processing. Can you advise on filter sizes or inexpensave filter material? I have a bunch of floor buffer pads (used). I thought of useing them durring the process.

I also have an old dairy sink, to offer the CO-OP for the filter process. It's about waste high and has two adjacent sink's the bottem of which are roughly 2 feet from the ground. Each sink probably holds 20 gal's. I must install larger drains for the bottem of both. FIGGER THEY WOULD BE handy for the primary cleaning of CO-OP fuel.

I have doctor's appmt. all day Fridqay. If I survive it I'll try to work Saturday at the Tank Farm on Johson Cr. See Ya then. Call me today if you get a chance about the use of my truck. (503) 663-2112, HM (502) 577-8517 Cell, or send me your PH number, I seem to have lost it. Thanx , Bill Dodds

PS: Im back to schoool in September, but still plan to help as time allows.

----------

From: mixmasters-request-qjLDD68F18PzqnJmKJVjZEEOCMrvLtNR@public.gmane.org
Reply-To: [email protected]
To: [email protected]
Subject: mixmasters Digest, Vol 30, Issue 2
Date: Wed, 2 Aug 2006 10:31:06 -0700 (PDT)
>Send mixmasters mailing list submissions to
> [email protected]
>
>To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.gobiodiesel.org/mailman/listinfo/mixmasters
>or, via email, send a message with subject or body 'help' to
> mixmasters-request-qjLDD68F18PzqnJmKJVjZEEOCMrvLtNR@public.gmane.org
>
>You can reach the person managing the list at
> mixmasters-owner-qjLDD68F18PzqnJmKJVjZEEOCMrvLtNR@public.gmane.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of mixmasters
digest..."
>
>
>Today's Topics:
>
> 1. RE: Weekly update (Shawn Swanson)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Wed, 2 Aug 2006 10:29:16 -0700
>From: "Shawn Swanson" <svs5r-/[email protected]>
>Subject: RE: [mixmasters] Weekly update
>To: "'GoBiodiesel Mixmasters'" <[email protected]>
>Message-ID: <20060802173057.3BA5A151C7-IcuUqqHpL2957eYmF0pcDQ@public.gmane.org>
>Content-Type: text/plain; charset="us-ascii"
>
>Hey Seth -
>
>I got a gig in CA to install a 9kwa Solar array starting next week and going
>into the next. This means I will miss the Thursday night meeting and won't
>make a work party until the 18th (see enclosed). Growl, but I'm
excited
>about the install gig ;-}
>
>I'll keep you posted if things change...
>
>Shawn
>
>-----Original Message-----
>From: mixmasters-bounces-qjLDD68F18PzqnJmKJVjZEEOCMrvLtNR@public.gmane.org
>[mailto:mixmasters-bounces-qjLDD68F18PzqnJmKJVjZEEOCMrvLtNR@public.gmane.org] On Behalf Of Seth Moody
>Sent: Wednesday, August 02, 2006 8:26 AM
>To: Mixmaster List
>Subject: [mixmasters] Weekly update
>
>Hello everyone.
>
>Once again a very good series of Mixmaster work parties last week,
>thanks to Nancy, Bob and Felix for their continued hard work.
>
>The rythm of fuel production is really setting in and we once again
>produced a finished batch last weeked, would have had two but had a
>mysterious emulsification which I believe was caused due to
>miscommunication. We started 2 new batchs and moved two others
down
>the pipe toward distribution.
>
>We have drained a tote of oil and will be cleaning it out in
>preparation for modifiying into an additional wash tote this week.
>
>At the same time more fuel will be produced on Friday as well as on
>Saturday along with washing and drying of existing batch's.
>
>Lots of stuff to do and have had very few contacts from you folks
>about commiting to specific days.
>
>Fuel production has to include more than 3 people for a entire months
>work parties.
>
>I won't sugar coat this, we need more participation from the
>Mixmasters otherwise levels of production will never service the Coop.
>You have shown interest and voiced a willingness to committ, now its
>time to actually put words to action.
>We need more people reliably capable of making
fuel not just cutting
>grass and filtering oil.
>
>Enough of the stick.
>
>Have a great week and hope to see you at Friday or Saturdays work party.
>
>By the way the calender is attached em me with the date you would
>like, this is not an interactive calender you actually have to
>communicate your choice to me.
>
>Seth
>[email protected]
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: 08 Mixmaster Calender.doc
>Type: application/msword
>Size: 35840 bytes
>Desc: not available
>Url : http://lsits.osourcery.com/pipermail/mixmasters/attachments/20060802/d2106ab2/08MixmasterCalender.doc
>
>------------------------------
>
>_______________________________________________
>mixmasters mailing
list
>[email protected]
>http://lists.gobiodiesel.org/mailman/listinfo/mixmasters
>
>End of mixmasters Digest, Vol 30, Issue 2
>*****************************************

_______________________________________________
mixmasters mailing list
[email protected]
http://lists.gobiodiesel.org/mailman/listinfo/mixmasters
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.