Re: [siteplan] Site planning meeting & oil heating
Zac Imboden <[email protected]> Wed, 28 Feb 2007 09:33:14 -0800
| Newsgroups | gmane.org.clubs.gobiodiesel.mixmasters |
|---|---|
| Message-ID | <[email protected]> |
Sounds Good. Here is the fuel update: Unable to react fuel We were unable to react a batch on Saturday. The oil, after preheating, was too murky. We let the oil settle unheated through Sunday-Monday. Monday Night Test Batches Monday night, we saw better separation when we drained off oil from the preheater, but were still trying to be cautious about the quality: when we boiled a sample of the remaining oil in the heater, we clearly saw water bubbles, starting at 120 F. Therefore, instead of reacting the whole batch, we reacted two test jars, one with oil from the preheater and one with oil which we drained off the bottom of the preheater. Need to Perform 3/27 test We need to perform the 3/27 test on these two jars. If, as I suspect, they fail the test, especially the oil from the preheater we will need, for the time being, to draw top oil from the oil totes that contain visible settling. A lot to do. Need people: 1) FIX THE HEATER SWITCH: The toggle wall switch for heater #2 does not function. It remains "on" even when the switch is flipped off. This needs to be repaired ASAP. IF Zan is not available to do this, Mich, can you find us an electrician. 2) The washer must be completed and ready to use by 3/17/07. Greg/ Felix, what's left to do on these things? 3) The dryer needs to be completed and ready to use by 3/17/07 The 17th is the date at which we should have at least 50-100 gallons of fuel ready to wash and dry, AT THE LATEST. 4) A few people to sit down and figure out how to mildly heat a tote of oil so that we can accelerate the settling without creating a heat convection. If we can't figure this out, we are going to have to look at doing 2-stage reactions and/or precleaning the oil. I don't think vacuum-heating is going to be our first option (but I'm not ruling it out). On Feb 25, 2007, at 11:21 PM, Felix Kersting wrote: > Friends, > > I am calling a site planning meeting on Wed March 7 @ 7 pm at the > site. We will discuss where we are and the one month, 3 month and > 6 month planning horizons. If you have agenda items, please > forward them to me. Feel free to call me @ 503-969-5996, evenings > only please unless it's a dire emergency - this is my work cell. > > See you there, > > Felix > _______________________________________________ > siteplan mailing list > [email protected] > http://lists.gobiodiesel.org/mailman/listinfo/siteplan > >