Re: mixmasters Digest, Vol 40, Issue 3

Jeff,

Thanks for letting us know what's going on.  this is valuable info and=20
we appreciate your willingness to work together with us.

I will let others respond to your questions.  If you don't get an=20
answer, please let me know and I will hunt down the answers - except=20
that I believe we were using 5.5% of the original  oil volume for the=20
prewash.  I believe the water was warm - about 130=B0F.  I specified the=20
wash, but never executed it!  (darned engineers!)

The only paraffin we normally see is from the totes we get.  They are=20
used for paraffin and have leftovers that we remove.

I am glad to see you back in (large scale) production - last time I was=20
out your way things were looking pretty charred.

Thanks again,

Felix

mixmasters-request-qjLDD68F18PzqnJmKJVjZEEOCMrvLtNR@public.gmane.org wrote:
>
> Hello,
>
> I've just subscribed to this list. Since our company needs to become a
> co-op member for this all to work. I figured that Dave and I should be
> looking at this list.
>
> I would like to keep you all updated from now on, so we can keep
> everyone informed on how each batch is going. Problems encountered,
> and what we are doing about it.
>
> A  5% pre-wash should be possible in our reactor. We recently filled
> the reactor to absolute max and think we can get between 10 - 14
> gallons of water added safely.
>
>
>  =20