Re: requirements

Hi Mohamed,
I dont have any comments on HEC, it has come up good. I
appreciate your effort.
  Lets start with the FEC block now.
Thanks and Regards
-- Ravi Ranjan Kumar



---- On 17 Mar 2004 17:08:17, Mohamed Salem
([email protected]) wrote:

> Thanks Ravi for the comments on the FEC 1/3 , I have updated
the
> document according to that. 
> 
> We need to define the following as a last steps to have a
final stable
> version of the bit-stream HW specs.
> 
> Now CRC and HEC are well defined. 
> We need to define the Interfaces for the :
> Whitening , FEC 1/3 and FEC 2/3 
> Signals inputs and outputs for each block and how the block
can process
> its mentioned function in the document by interfacing with
these
> signals.
> 
> I will post the new version of the document now at : 
> 
> http://www.handasarabia.org/document.php?id=110
> 
> please review and provide me with what is needed above to
complete the
> whole scope of the document according to the same scheme used
for the
> completed components like CRC and HEC ... 
> 
> Best Regards, 
> Mohamed A.Salem
> 
> 
> 
> 
> --------------------------
> NOUR Mailing List
> Handasa Arabia Organization
> http://www.handasarabia.org
> [email protected]
> 
> Message number 127
> 
> 
> 


________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag

--------------------------
NOUR Mailing List
Handasa Arabia Organization
http://www.handasarabia.org
[email protected]

Message number 130