(Adel Youssef )DATAPATH

--=-gwY4hOJekCcBOInI8Nif
Content-Type: text/plain
Content-Transfer-Encoding: 7bit



--=-gwY4hOJekCcBOInI8Nif
Content-Disposition: inline
Content-Description: Forwarded message - [Fwd: (Adel Youssef )DATAPATH]
Content-Type: message/rfc822

Subject: [Fwd: (Adel Youssef )DATAPATH]
From: Mohamed Salem <[email protected]>
Reply-To: [email protected]
To: NOUR <[email protected]>
Content-Type: multipart/mixed; boundary="=-gy+Dpp1Nc8kXEc2zHSnT"
Organization: Handasa Arabia
Message-Id: <1071989730.1664.2.camel-XQbAy6nqfpXG/[email protected]>
Mime-Version: 1.0
X-Mailer: Ximian Evolution 1.2.2 
Date: 21 Dec 2003 08:57:03 +0200


--=-gy+Dpp1Nc8kXEc2zHSnT
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Hi Adel, 
I sent the message on Thursday , I hope it will reach u this time ..Look
forwarded message ..


--=-gy+Dpp1Nc8kXEc2zHSnT
Content-Disposition: inline
Content-Description: Forwarded message - (Adel Youssef )DATAPATH
Content-Type: message/rfc822

Subject: (Adel Youssef )DATAPATH
From: Mohamed Salem <[email protected]>
Reply-To: [email protected]
To: NOUR <[email protected]>
In-Reply-To: <1071752154.1617.27.camel-XQbAy6nqfpXG/[email protected]>
References: <1071405691.1644.16.camel-XQbAy6nqfpXG/[email protected]>
	 <1071752154.1617.27.camel-XQbAy6nqfpXG/[email protected]>
Content-Type: text/plain
Organization: Handasa Arabia
Message-Id: <1071762215.1617.70.camel-XQbAy6nqfpXG/[email protected]>
Mime-Version: 1.0
X-Mailer: Ximian Evolution 1.2.2 
Date: 18 Dec 2003 17:43:35 +0200
Content-Transfer-Encoding: 7bit

Salam Adel,
How r u doing ? I am very much pleased to have such an expert in the
software side contributing to NOUR project who also has a solid
background in BT ... 

We are now involved in the DATAPATH design (page 5-15) in the specs.
Could u please, support us by developing the system model for that part
of the design ... 
We are most likely going to implement the system model in a tool called
Ptolemy  which is JAVA based and it is an open-source provided from UC,
Berekeley http://ptolemy.eecs.berkeley.edu
If u can develop in any other platform in MATLAB or others just let me
know , but we are much more interested in Ptolemy ..If u need any
information about Ptolemy just let me know Adel .. 
I will author an article or a tutorial about Ptolemy when the time
permits me ... 
I would like also to have your review about the DataPath in specs. as we
r updating the document while development ...

Thanks Adel for your participation....
Please forward your Yahoo ID to me to add u to my messenger list.
My ID is mosalem2003 (Yahoo)

Best Regards,
Mohamed A.Salem
Handasa Arabia Co-Founder
www.handasarabia.org



On Thu, 2003-12-18 at 14:55, Mohamed Salem wrote:
> Dear ALL,
> The DataPath design and integration process focuses on the following
> modules:
> 
> --CRC
> --HEC
> --Scrambler/De-Scrambler
> --FEC
> --Correlator.
> --Access Code Correlator 
> --Flow Controller
> --Header
> --p/s 
> --s/p 
> --RF Interface
> --Encryption.
> 
> I'll send the interested participants individual e-mails titled on the
> mailing-list here with their proposed activities in NOUR >> 
> 
> Thanks all for time and interest..
> 
> Best Regards,
> Mohamed A.Salem
> Handasa Arabia Co-Founder
> www.handasarabia.org
> 
> 
> 
> 
>  Sun, 2003-12-14 at 14:41, Mohamed Salem wrote:
> > Hi all,
> > How r u doing .. ? I wish u all a good year .. 
> > ----- BACK TO ACTIVITY >.
> > We will start to integrate the NOUR DATAPATH at first ..
> >  we need to start from the datapath and simulate each block and
> > integrate the datapath and release it at first .. 
> > Then we will move from one part to another until the project end ..
> > 
> > 	NOw, I need the participants who has completed some of the blocks to
> > send it  as we need to upload it under the project files ..
> > Each participant who sees that he/she can add to the specs section for
> > the core he/she designed or would be designed by other, please send ur
> > modifications and comments .. 
> > AGAIN, we will start from the DATAPATH ..
> > 
> > IF any one needs to add to the specs of any block or modify it , please
> > do here on the  list .. 
> > 
> > Attach with ur code (if u designed the core ) the block diagram and a
> > brief description . we will need also the test bench used in
> > simulation..
> > 
> > ON another note, Puloma had done some work , please Puloma forward your
> > code ..
> > Thanks all for your time and interest ..
> > We are defintely progressing with anyone effort..
> > 
> > Thanks 
> > Best Regards,
> > Mohamed A.Salem
> > Handasa Arabia Co-Founder
> > www.handasarabia.org
> > 
> > 
> > --------------------------
> > NOUR Mailing List
> > Handasa Arabia Organization
> > http://www.handasarabia.org
> > [email protected]
> > 
> > Message number 89

--=-gy+Dpp1Nc8kXEc2zHSnT--



--=-gwY4hOJekCcBOInI8Nif
Content-Type: text/plain; charset=us-ascii

--------------------------
NOUR Mailing List
Handasa Arabia Organization
http://www.handasarabia.org
[email protected]

Message number 94
--=-gwY4hOJekCcBOInI8Nif--