Drive type...
Keith <[email protected]>
| Newsgroups | gmane.org.operators.internet-access |
|---|---|
| Message-ID | <[email protected]> |
Aquired a running server, FreeBSD 4.10. One of the drives has gone bad in the RAID5 partition. Problem is I dont know what size the drive it is. Is there any way I can tell what size drive it is without shutting down the server and pulling the drive? It has 8 drives, /dev/amrd0s1a /dev/amrd0s1e /dev/amrd0s1f These are 2 drives in RAID1 /dev/amrd1s1e These are 2 drives in RAID1 /dev/amrd2s1e This is 3 drives in RAID5 with HS. amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 8568MB (17547264 sectors) RAID 1 (optimal) amrd1: <LSILogic MegaRAID logical drive> on amr0 amrd1: 8568MB (17547264 sectors) RAID 1 (optimal) amrd2: <LSILogic MegaRAID logical drive> on amr0 amrd2: 34556MB (70770688 sectors) RAID 5 (degraded) SMP: AP CPU #1 Launched! pass1 at amr0 bus 0 target 6 lun 0 pass1: <DELL 1x2 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device pass2 at amr0 bus 1 target 6 lun 0 pass2: <DELL 1x8 U2W SCSI BP 5.35> Fixed Processor SCSI-2 device Mounting root from ufs:/dev/amrd0s1a This is a dmesg. I'm thinking its an 18G drive. Anyone know what size drive it is so I can make sure I have the correct size on hand when I do a shutdown to replace the drive? Thanks, Keith _______________________________________________ "Eat sushi frequently". - Avi [email protected] is the human contact address. [email protected] is the list posting address. See below URL for subscribe/unsubscribe and list options: http://inet-access.net/mailman/listinfo/list