Re: BRAS Options
Gavin Tweedie <gavin.tweedie-w8AlbrWEzJ5Wk0Htik3J/[email protected]>
| Newsgroups | gmane.org.operators.nznog |
|---|---|
| Message-ID | <CADmtHhSQO0mp4Z5r4hO-32noFTVgyOmH6GLP=q-COXaePsu76A@mail.gmail.com> |
Can you tell Sam and I used to work at the same company? :) On Wed, Nov 8, 2017 at 8:24 AM, Sam Silvester <[email protected]> wrote: > To a point, the number of subscribers doesn't matter as much as the > throughput. If you're looking at 16k+ subs on a single box, you probably > need to start being a little careful but otherwise just make sure you've > got a decent RP and you should be right. > > If you simply need to shift (say) 10Gbps of traffic with "more than a few > thousand" but say less than 16k, then anything in the ASR range with an RP2 > and ESP40 will almost certainly be ample. > > Another thought, considering you mention the 7301, is to scale out > horizontally - it's not clear if you're already doing this. The nice bit > about that also is you could have a few 7201s sharing the load 4 ways, > which means your IP pool overhead to cater for a box failure is also much > less than running only two boxes. > > On Wed, Nov 8, 2017 at 9:41 AM, Dave Mill <[email protected]> wrote: > >> A Juniper MX40 or MX80 seems to meet your needs there - depending on >> exact subscriber figures. From memory if every customer is in QinQ you >> won't be able to have more than 8000 on a MX80 series chassis due to >> interface limits. >> >> Dave >> >> On Wed, Nov 8, 2017 at 12:07 PM, Stan Rivett <[email protected]> >> wrote: >> >>> Crikey, thanks for all the replies >>> >>> Yes we need 10 Gbit, at least 3 ports and I'd rather not be too specific >>> about numbers but more than a few thousand. >>> >>> Apologies for being a bit of a cheap bugger but you know what its like >>> as an SME, it all comes out of my pocket ;-) >>> >>> Cheers >>> >>> Stan Rivett >>> ------------------ >>> Netspeed >>> PO Box 5691 >>> Dunedin >>> P: +64 3 481 7245 <+64%203-481%207245> >>> C: +64 21 323 841 <+64%2021%20323%20841> >>> ------------------ >>> >>> On 8 November 2017 at 11:14, Tim Price <[email protected]> wrote: >>> >>>> Juniper MX5 + licensing shouldn’t cost you more than $30k depending on >>>> your Juniper partner status and where you buy it from. >>>> >>>> >>>> >>>> *From: *<[email protected]> on behalf of Stan Rivett < >>>> [email protected]> >>>> *Date: *Wednesday, 8 November 2017 at 11:02 AM >>>> *To: *nznog <[email protected]> >>>> *Subject: *[nznog] BRAS Options >>>> >>>> >>>> >>>> Hi all >>>> >>>> >>>> >>>> The time has come to replace my poor old Cisco 7301 and the quote I got >>>> for an ASR1002-HX made my eyes water. Still waiting for a Juniper quote but >>>> the general discussion seemed like similar numbers. >>>> >>>> >>>> >>>> Are there any other reliable options out there that don't cost more >>>> than my first house? >>>> >>>> >>>> >>>> Cheers >>>> >>>> >>>> >>>> Stan Rivett >>>> >>>> ------------------ >>>> >>>> Netspeed >>>> >>>> PO Box 5691 >>>> >>>> Dunedin >>>> >>>> P: +64 3 481 7245 <03-481%207245> >>>> >>>> C: +64 21 323 841 <021%20323%20841> >>>> >>>> ------------------ >>>> >>>> _______________________________________________ NZNOG mailing list >>>> [email protected] https://list.waikato.ac.nz/mai >>>> lman/listinfo/nznog >>>> >>> >>> >>> _______________________________________________ >>> NZNOG mailing list >>> [email protected] >>> https://list.waikato.ac.nz/mailman/listinfo/nznog >>> >>> >> >> _______________________________________________ >> NZNOG mailing list >> [email protected] >> https://list.waikato.ac.nz/mailman/listinfo/nznog >> >> > > _______________________________________________ > NZNOG mailing list > [email protected] > https://list.waikato.ac.nz/mailman/listinfo/nznog > > -- Global Interconnection Director Megaport <https://www.megaport.com> +61 498 498 458 _______________________________________________ NZNOG mailing list [email protected] https://list.waikato.ac.nz/mailman/listinfo/nznog