debian etch cd drives not detected also...

--===============0262151973==
Content-Type: multipart/alternative; 
	boundary="----=_Part_33134_12937453.1155119745201"

------=_Part_33134_12937453.1155119745201
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello,
 I changed my mobo to gigabyte ga-81915ME-GV based on intel 915GV
chipset.iearlier used intel original D915GAV
board.so after removing and installed the n00 board.i tried installing
debian etch with netinstall cd...but if fails in detecting my sony cd-rw and
LG-DVD ROM drives even after inserting all necessary modules like cdrom
etc...also i have a working FC5 install which earlier shows drives as DVD is
/dev/hda and cd-rw as /dev/hdb.i searched and found that new device files
are hdc as primary dvd drive and hdd as secondary.also my hdd is SATA
seagate which is running OK as primary.
Now how do i install etch or any other distros...all failed...where are U
geeks...

I resolved it while booting with CD:
 Code:

install libata.atapi_enabled=1

now after installed new kernel 2.6.17xxx ,my cd/dvd drives yet again lost
their device files in /dev.earlier are /dev/scd0 and /dev/scd1.i donno why
these problems!
below is dmesg o/p main parts:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
libata version 1.20 loaded.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
USB Universal Host Controller Interface driver v3.0
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:207f
ata1: dev 0 ATA-6, max UDMA/133, 156299375 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
  Vendor: ATA       Model: ST380013AS        Rev: 3.18
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 1 cfg 49:0f00 82:4218 83:4000 84:4000 85:4218 86:4000 87:4000 88:0407
ata2: dev 1 ATAPI, max UDMA/33
ata2: qc timeout (cmd 0xef)
ata2: failed to set xfermode (err_mask=0x4)
scsi1 : ata_piix
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000b000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
sd 0:0:0:0: Attached scsi disk sda

As U see, same problem as earlier,i only have a sata hdd connected to
sata0 port.on ide port two cd roms are connected as master and slave
mode and jumpers are all set correct also....help....

------=_Part_33134_12937453.1155119745201
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello,<br>&nbsp;I changed my mobo to gigabyte ga-81915ME-GV based on intel 915GV
chipset.i earlier used intel original D915GAV board.so after removing
and installed the n00 board.i tried installing debian etch with
netinstall cd...but if fails in detecting my sony cd-rw and LG-DVD ROM
drives even after inserting all necessary modules like cdrom etc...also
i have a working FC5 install which earlier shows drives as DVD is
/dev/hda and cd-rw as /dev/hdb.i searched and found that new device
files are hdc as primary dvd drive and hdd as secondary.also my hdd is
SATA seagate which is running OK as primary.<br>
Now how do i install etch or any other distros...all failed...where are U geeks...<img src="http://www.thinkdigit.com/forum/images/smilies/icon_surprised.gif" alt="" title="Surprised" class="inlineimg" border="0"><br>
<br>
I resolved it while booting with CD:<br>
<div style="margin: 5px 20px 20px;"> <div class="smallfont" style="margin-bottom: 2px;">Code:</div> <pre class="alt2" style="border: 1px inset ; margin: 0px; padding: 6px; overflow: auto; width: 600px; height: 34px;"><div dir="ltr" style="text-align: left;">
install libata.atapi_enabled=1</div></pre> </div>now after installed new kernel 2.6.17xxx ,my cd/dvd drives yet again
lost their device files in /dev.earlier are /dev/scd0 and /dev/scd1.i
donno why these problems!<br>
below is dmesg o/p main parts:<br><pre class="alt2" style="border: 1px inset ; margin: 0px; padding: 6px; overflow: auto; width: 600px; height: 418px;"><font><font><font><font face="Times New Roman"><font size="4"><font color="DarkRed">
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2<br>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<br>SCSI subsystem initialized<br>libata version 1.20 loaded.<br>usbcore: registered new driver usbfs
<br>usbcore: registered new driver hub<br>ata_piix 0000:00:1f.2: version 1.05<br>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]<br>ACPI: PCI Interrupt 0000:00:1f.2[b] -&gt; GSI 19 (level, low) -&gt; IRQ 177<br>PCI: Setting latency timer of device 0000:00:
1f.2 to 64<br>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14<br>USB Universal Host Controller Interface driver v3.0<br>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3468 86:3c01 87:4003 88:207f<br>ata1: dev 0 ATA-6, max UDMA/133, 156299375 sectors: LBA48
<br>ata1: dev 0 configured for UDMA/133<br>scsi0 : ata_piix<br>  Vendor: ATA       Model: ST380013AS        Rev: 3.18<br>  Type:   Direct-Access                      ANSI SCSI revision: 05<br>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
<br>ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407<br>ata2: dev 0 ATAPI, max UDMA/33<br>ata2: dev 1 cfg 49:0f00 82:4218 83:4000 84:4000 85:4218 86:4000 87:4000 88:0407<br>ata2: dev 1 ATAPI, max UDMA/33
<br>ata2: qc timeout (cmd 0xef)<br>ata2: failed to set xfermode (err_mask=0x4)<br>scsi1 : ata_piix<br>ACPI: PCI Interrupt 0000:00:1d.0[A] -&gt; GSI 23 (level, low) -&gt; IRQ 185<br>PCI: Setting latency timer of device 0000:00:
1d.0 to 64<br>uhci_hcd 0000:00:1d.0: UHCI Host Controller<br>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1<br>uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000b000<br>usb usb1: configuration #1 chosen from 1 choice
<br>hub 1-0:1.0: USB hub found<br>hub 1-0:1.0: 2 ports detected<br>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)<br>sda: Write Protect is off<br>sda: Mode Sense: 00 3a 00 00<br>SCSI device sda: drive cache: write back
<br>SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)<br>sda: Write Protect is off<br>sda: Mode Sense: 00 3a 00 00<br>SCSI device sda: drive cache: write back<br> sda: sda1 sda2 &lt; sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 &gt;
<br>sd 0:0:0:0: Attached scsi disk sda<br><br></font></font></font></font></font></font>As U see, same problem as earlier,i only have a sata hdd connected to<br>sata0 port.on ide port two cd roms are connected as master and slave
<br>mode and jumpers are all set correct also....help....<br></pre><br>

------=_Part_33134_12937453.1155119745201--


--===============0262151973==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
FSUG-Kochi-Discuss mailing list
FSUG-Kochi-Discuss-8H24Gfgyrqprzt3WPRo2bV6hYfS7NtTn@public.gmane.org
http://puggy.symonds.net/cgi-bin/mailman/listinfo/fsug-kochi-discuss

--===============0262151973==--