Re: Bad Memory Was: Bad Swap caused my new video card?
jlweaver <[email protected]>
| Newsgroups | gmane.org.user-groups.aclug.linux-help |
|---|---|
| Message-ID | <[email protected]> |
Bet you have a bunch of HP printers too. Clint Brubakken wrote: >I just wish the person (not me) who purchased these computers had >realised this before this before they had bought 4 of them > > > >On Thu, 2003-01-30 at 09:24, jlweaver wrote: > > >>Some people are slow to come to the realization that HP computers are a >>bunch of s..t >> >>Clint Brubakken wrote: >> >> >> >>>I tried to get it to work with both video cards enabled, and emetest86 >>>still gave errors. I took out the vodoo and it works slow but study. HP >>>or more accuratley SIS just seems to suck. >>> >>>This vodoo card was working fine in a wintel dell box before I acquired >>>it. >>> >>>My suggestion would be never use a HP. In fact I want to get them to buy >>>a Penguin Computing workstation, something that just works when I get >>>it, so I can actually do my job effectively. >>> >>> >>> >>>On Wed, 2003-01-29 at 17:14, James Lancaster wrote: >>> >>> >>> >>> >>>>On Wednesday 29 January 2003 10:01, you wrote: >>>> >>>> >>>> >>>> >>>>>On 28 Jan 2003, Jonathan Hall wrote: >>>>> >>>>> >>>>> >>>>> >>>>>>Since he's using memtest86 when he gets the errors, and memtest86 >>>>>>doesn't use X Windows, then the answer is obviously yes--the errors DO >>>>>>occur when not using X. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>it happened last night, X was crashed and logging caused more kernel >>>>>errors. Also yesterday afternoon, the hard drive started clicking, and ls >>>>>would hang. I unmounted the hard drive and set it horizintal , and >>>>>that seemed to fix that, I doubt that would be caused by the video card, >>>>>but maybe something I did when trying to get the <explitive deleted> case >>>>>apart. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>My suggestions, in no particular order: >>>>>> >>>>>>Run memtest86 with the old video card in place. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>There were to setting I changed when I dissables the onboard video: I xset >>>>>the VGA setting jumper (VEN_DIS) to disable, and the VGA interrupt >>>>>selection to disable, which from the mother board discriptions the second >>>>>should disable the "chipsets internal interrupt routing", I assume only >>>>>for the onboard video only. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>Try reenabling that, (VGA interrupt) that is likely the cause. >>>> >>>>I have a V3 2000 in a box (won't be able to see for a while (maybe a day or >>>>more, though it is likely one of the smallest uptime boxes running linux, due >>>>to moving it physically) >>>> >>>>also try lspci -vvv (I think -vv is max but not sure) and see what interrupt >>>>it has, and see if it is sharing it, and if the other video card is on there >>>>(should be but disabled, at least with a similar setup on the system above)) >>>> >>>> >>>>James L >>>> >>>> >>>> >>>> >>>> >>>>>>Run memtest86 with another video card in place (get a cheap/free one if >>>>>>you can) >>>>>>Test the RAM in another machine. >>>>>>Test the Voodoo 3 in another machine. >>>>>>Try RAM from another machine in that box. >>>>>>Check your BIOS settings. Perhaps you can tweak your RAM and/or PCI >>>>>>timings. >>>>>> >>>>>>Other questions: What motherboard are you using? What chipset does it >>>>>>use? What CPU and RAM configuration? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>I am using a ASUS PSS-VN with a K6-2 550 , i AM USING TO 128mb crucial >>>>>brand dimms. >>>>> >>>>> >>>>> >>>>> >>>>-- This is the [email protected] list. To unsubscribe, >>>>visit http://www.complete.org/cgi-bin/listargate-aclug.cgi >>>> >>>> >>>> >>>> >>-- This is the [email protected] list. To unsubscribe, >>visit http://www.complete.org/cgi-bin/listargate-aclug.cgi >> >> -- This is the [email protected] list. To unsubscribe, visit http://www.complete.org/cgi-bin/listargate-aclug.cgi