Re: hardware help Off Topic

The following is learned the hard way....

Dimms come in two formats.

Single density
Double density

Many older motherboards will not support double density memory.

Most current retail memory is double density.

Now the way that you use to be able to tell the difference is..

If chips are only on one side of the dimm package then it
"should" be single density.

But due to how cheap memory is now days.. on a mainboard that
seems to work with only single density dimms then you just
purchase a dimm of twice the size that you want to add to the
computer.

--David


----- Original Message -----
From: "bruce" <[email protected]>
To: <[email protected]>
Sent: Saturday, April 05, 2003 9:23 AM
Subject: [linux-help] Re: hardware help Off Topic


> On Thursday 03 April 2003 10:52 pm, David wrote:
> > I just did a qucik 'Google' search anf found the following
site:
> > http://www.duxcw.com/faq/ps/ps4.htm
> > [site has a graphic]
>
> Thanks to the information on the site David found, I was able
to test
> the power supply on the bench.  It was good.
>
> I reinstalled it in the chassis and tried to power up again.
Surprise
> - it started!  Bios still only reports 64Meg memory, even with
two
> 128Meg dimms, and won't boot except to DOS with a floppy, but
it's a
> computer now.
>
> There has to be a bad connection somewhere, but I hesitate to
go
> probing around.
>
> Thanks for all the help,
> bruce
> -- This is the [email protected] list.  To unsubscribe,
> visit http://www.complete.org/cgi-bin/listargate-aclug.cgi
>


-- This is the [email protected] list.  To unsubscribe,
visit http://www.complete.org/cgi-bin/listargate-aclug.cgi