Re: My new Dell

On Sunday 24 July 2005 19:18, Nate Bargmann wrote:
> * bbales <[email protected]> [2005 Jul 24 18:58 -0500]:
> > This is embarrassing.  I have opened up 100 computers.  Some were
> > difficult, but most were pretty straightforward and obvious.  But I
> > can't get into this one.
> >
> > It's a new $299 Dell Dimension 2400 and I got the front off, although
> > some of the tin is bent and one of the plastic clips broke.  But the
> > side has to slide back and it won't.  There has to be a secret catch
> > someplace.
> >
> > Has anyone gotten to the inside of one of these or have any ideas?
> > bruce
>
> We installed a bunch of Dells at work last year and I don't remember
> the model but they have a button on each side of the case toward the
> rear.  Press them both in and the latches at the rear release and the
> top of the case hinges upward.  The case is hinged at the front.  It's
> probably not the same but that's all I know about Dell's even though
> I'm now in an A+ course.  ;-)
>
> - Nate >>
Thanks, Nate.  The right side and top are riveted to the back and front.  
The bottom is riveted to the front and back.

Het!  I got it.  You mentioned buttons and I went tried pushing harder on 
the big plastic piece on the back.  I had tried it before, but a bit of 
extra push and it moved.  Then the side slid back.  

Thanks, bruce

-- This is the [email protected] list.  To unsubscribe,
visit http://www.complete.org/cgi-bin/listargate-aclug.cgi