Re: Problem
Larry Weaver <[email protected]> Tue, 29 Nov 2005 10:40:54 -0600
| Newsgroups | gmane.org.user-groups.aclug.linux-help |
|---|---|
| Message-ID | <[email protected]> |
Are you sure the wall outlet has power ? Check the power cord end at the computer for voltage. If OK, then check the voltage at the computer side to determine if you have a bad switch. Wayne White wrote: >I'm having problems with a computer and thought that there might >be someone on the list that had some thoughts on a solution. > >Monday, last week, I got to work and my computer was off. I tried >to turn it on and nothing happened. I was able to determine that >the power cord had power at the plug to the power supply. > >When the power button on the computer was pressed, nothing >happened at all. No lights, no whirring, no beeps. > >The first thing that I tried was swapping out the power supply for >one I know to be good. Same result, nothing happens when power >button pushed. > >That made me think that the motherboard must have fried. So, I >swapped in a good motherboard. While the case was open, I >checked the switch on the front panel and had continuity when >it was pressed. Still nothing doing. > >I'm at loss as to what else might be causing this computer to act >as if it were getting no power at all when I try to start it up. > >Any ideas? > >Thanks in advance, > >wayne > > > >-- This is the [email protected] list. To unsubscribe, >visit http://www.complete.org/cgi-bin/listargate-aclug.cgi > > > > -- This is the [email protected] list. To unsubscribe, visit http://www.complete.org/cgi-bin/listargate-aclug.cgi