RE: WEP problem on Mandrake

Didn't find any such file on my Mandrake (the graphical find crashes
systematically btw). Where could it be, or what else should I look for?

Thanks

Fred

-----Original Message-----
From: blug-tech-bounces-+qp3TudyjKPvfBIPTTProkB+6BGkLq7r@public.gmane.org
[mailto:blug-tech-bounces-+qp3TudyjKPvfBIPTTProkB+6BGkLq7r@public.gmane.org] On Behalf Of Frederic Muller
Sent: Thursday 15 April, 2004 13:20
To: 'Beijing LUG technical questions and assistance - Publicly posted'
Subject: RE: [blug-tech] WEP problem on Mandrake


No I did not look into that file. 

Good tips on security - though I live in a Chinese populated hutong where
computer penetration is rather low. Was even thinking of giving access to my
neighbors as I have 2 extra USB Wireless adapters...

But then who knows...?

Will check that file asap and let you know.

Thanks

Fred

-----Original Message-----
From: blug-tech-bounces-+qp3TudyjKPvfBIPTTProkB+6BGkLq7r@public.gmane.org
[mailto:blug-tech-bounces-+qp3TudyjKPvfBIPTTProkB+6BGkLq7r@public.gmane.org] On Behalf Of Richard Ford
Sent: Thursday 15 April, 2004 12:39
To: Beijing LUG technical questions and assistance - Publicly posted
Subject: Re: [blug-tech] WEP problem on Mandrake


Have you tried editing the if-config-??? file manually?

Here is a copy of mine....


STARTMODE=hotplug
DEVICE=ath0
BOOTPROTO=dhcp
WIRELESS=yes
MODE=Managed
ESSID=*****************
CHANNEL=**
KEY=*****************

I employ good wifi practices:

SSID Broadcast off.
WEP on.
Non-stanrd ssid name and channel.
And MAC address filtering in the router to only allow authorised cards to
connect. non standard internal IP address range

The only bad thing I do is use DHCP - which advertises my "obscure" IP range
(if they could break the mac filtering and wep and discover the hidden
essid).

RF.



On Thu, 2004-04-15 at 12:34, Paiato Matteo wrote:
> And you are thinking to just to say :'I'm using Mandrake 10 on my 
> wireless LAN" without give more info on this!!!!!! :-) Come on, tell 
> us the full story... wich card are u using? it was automatically 
> configured or you did some hack to make it working? I think a lot of 
> Penguins are interested in this, even if WEP is disabled.
> Ciao
> 
> Matteo
> 
> On Apr 15, 2004, at 12:13 PM, Frederic Muller wrote:
> 
> > Hi!
> >
> > I am using Mandrake 10 on my wireless LAN. Everything is working
> > fine
> > when
> > WEP encryption is disabled. Though enabling encryption just does not 
> > work
> > for me. I guess I might be entering the key in a wrong format since 
> > through
> > the Mandrake Control Center the Encryption box does not specify any 
> > format.
> > I did some research online (a bit) and could not come up with any fix 
> > yet.
> > Also tried wlcardconfig but it comes up with a error message even 
> > before
> > starting to configure anything.
> >
> > Anyone with similar problem who managed to get it resolved?
> >
> > Thanks
> >
> > Fred
> >
> > _______________________________________________
> > blug-tech list
> > [email protected]
> > http://list.beijinglug.org/cgi-bin/mailman/listinfo/blug-tech
> >
> 
> _______________________________________________
> blug-tech list
> [email protected]
> http://list.beijinglug.org/cgi-bin/mailman/listinfo/blug-tech

_______________________________________________
blug-tech list
[email protected]
http://list.beijinglug.org/cgi-bin/mailman/listinfo/blug-tech


_______________________________________________
blug-tech list
[email protected]
http://list.beijinglug.org/cgi-bin/mailman/listinfo/blug-tech