Problemas con Icecast2

# This be a comment, I like comments.
# To use this file, copy it to etc/shout.conf in the shout base directory
#
# Or, if you plan multiple instances/channels/mount points of shout
# call shout with -C <name> to use a copy of this conf file
# This is so you can have 5 or 500 shout instances running, each with a
# different .conf file, yippee

################################################################################
# I suggest you read this file carefully, and don't do anything silly
# cause the configuration file parser is pretty lame.
################################################################################

############### Server Location and Connection Options #########################
# server_name - There is no support, as in icecast, of anything but a valid 
# resolvable server name.  No dynamic names here. localhost is, of course, the 
# same machine shout is running on, so this is the only exception. This is when 
# the server, and  shout reside on the same physical machine.
#
# port - should be the port as configured in icecast.conf recieving connections.
#
# password  - should be the same as defined in the icecast.conf file, as the
# encoder password.
#
# mount - is the mountpoint for this stream. Think of this as what channel on 
# the server this stream is for. For instance, you might have several channels 
# on your server, all providing different content.  You might have a rock, rap,
# and # techno channels, or a 56bit and 128bit channel. You would then run a 
# copy of shout for each, specifing different mount's, or channels to reside 
# on. So, you would have http://localhost:8000/rock, http://localhost:8000/rap,
# and # http://localhost:8000/techno, if you specified each copy of shout to 
# use rock, rap, and techno as their different mount points. Got it yet?
############### 

server_name localhost
port 8000
password sourcePass
mount miestacion

##################### Server Information #################################
#
# name - whatever the name of this stream is called
#
# desc - a description of said named channel
#
# genre - what kind of stream, could be talk, rap, rock, alt, techo, ect...
#
# url - what web site you want associated with this stream
#
# public - yes/no - if you want this stream published in a yp server lookup list
# this is only supported if the icecast server has yp touch enabled, with valid
# yp server listings.
############### 

name Mi_Estacion
desc Probando mi estacion de radio
genre Mi_Musica
url http://192.168.1.200/

public yes

############### Stream options #################################################
# short_titles - yes/no - trim the path names from file names when using non ID3
# data for stream title info 
#
# title_streaming - yes/no - turns title updates on or off.
#
# id3 - yes/no - use id3 tags for title streaming (has no effect if 
# title_streaming is no)
#
# autocorrect - yes/no - adapt the stream calculations to match each file's 
# bitrate
############### 

short_titles yes
title_streaming yes
id3 yes
autocorrect yes

############### Playlist options ###############################################
# playlist - uh, duh, this is a file containing a list of file to be streamed
# dont't forget full path names in the playlist. The playlist itself resides in
# the etc directory along with this conf file.
#
# loop -  yes/no - should the playlist loop, when it runs out?
#
# shuffle - yes/no - should the playlist be shuffled between tracks? 
# (randomized)
#
# autodetect - yes/no - actually check the file for bitrate info, before trying
# to stream it. if no, it will be sent at the default bitrate
#
# default_bitrate - when all else fails, use this bitrate for stream bitrate
# calculations. NOTE: if this is different from the actual file, and autodetect
# is off, it will be streamed at the incorrect bitrate, resulting in malformed
# playback at the client end.
#
# force - yes/no - used in conjunction with default_bitrate, if the next file
# in line to be streamed does not match the default_bitrate, and force is on,
# that file will be skipped.
#
############### 

playlist shout.playlist
loop yes
shuffle no

autodetect yes
default_bitrate 128000
force no

############### Advanced options ###############################################
# daemon - set to yes to cause shout to be launched in the background (not
# available for Win32)
#
# verbose - yes/no turn on extra text output
############### 

daemon no
verbose yes

<icecast>
    <limits>
        <clients>100</clients>
        <sources>2</sources>
        <threadpool>5</threadpool>
        <queue-size>1024000</queue-size>
        <client-timeout>30</client-timeout>
        <header-timeout>15</header-timeout>
        <source-timeout>10</source-timeout>
        <!-- If enabled, this will provide a burst of data when a client 
             first connects, thereby significantly reducing the startup 
             time for listeners that do substantial buffering. However,
             it also significantly increases latency between the source
             client and listening client.  For low-latency setups, you
             might want to disable this. -->
        <burst-on-connect>1</burst-on-connect>
        <!-- same as burst-on-connect, but this allows for being more
             specific on how much to burst. Most people won't need to
             change from the default 64k. Applies to all mountpoints  -->
        <burst-size>65535</burst-size>
    </limits>

    <authentication>
        <!-- Sources log in with username 'source' -->
        <source-password>sourcePass</source-password>
        <!-- Relays log in username 'relay' -->
        <relay-password>relayPass</relay-password>

        <!-- Admin logs in with the username given below -->
        <admin-user>admin</admin-user>
        <admin-password>adminPass</admin-password>
    </authentication>

    <!-- Uncomment this if you want directory listings -->
    <!--
    <directory>
        <yp-url-timeout>15</yp-url-timeout>
        <yp-url>http://dir.xiph.org/cgi-bin/yp-cgi</yp-url>
    </directory>
    <directory>
        <yp-url-timeout>15</yp-url-timeout>
        <yp-url>http://www.oddsock.org/cgi-bin/yp-cgi</yp-url>
    </directory>
     -->

    <!-- This is the hostname other people will use to connect to your server.
    It affects mainly the urls generated by Icecast for playlists and yp
    listings. -->
    <hostname>192.168.1.200</hostname>

    <!-- You can use these two if you only want a single listener -->
    <!--<port>8000</port> -->
    <!--<bind-address>127.0.0.1</bind-address>-->

    <!-- You may have multiple <listener> elements -->
    <listen-socket>
        <port>8000</port>
        <!-- <bind-address>127.0.0.1</bind-address> -->
    </listen-socket>
    <!--
    <listen-socket>
        <port>8001</port>
    </listen-socket>
    -->

    <!--<master-server>127.0.0.1</master-server>-->
    <!--<master-server-port>8001</master-server-port>-->
    <!--<master-update-interval>120</master-update-interval>-->
    <!--<master-password>hackme</master-password>-->
    <!--
    <relay>
        <server>127.0.0.1</server>
        <port>8001</port>
        <mount>/example.ogg</mount>
        <local-mount>/different.ogg</local-mount>

        <relay-shoutcast-metadata>0</relay-shoutcast-metadata>
    </relay>
    -->

    <!-- Only define a <mount> section if you want to use advanced options,
         like alternative usernames or passwords
     editado! -->
    <mount>
        <mount-name>/miestacion</mount-name>

        <username>source</username>
        <password>sourcePass</password>

        <max-listeners>10</max-listeners>
        <dump-file>/tmp/dump-example1.ogg</dump-file>
        <burst-size>65536</burst-size>
        <fallback-mount>/example2.ogg</fallback-mount>
        <fallback-override>1</fallback-override>
        <hidden>1</hidden>
        <no-yp>1</no-yp>
        <authentication type="htpasswd">
                <option name="filename" value="myauth"/>
                <option name="allow_duplicate_users" value="0"/>
        </authentication>
    </mount>
    <!-- editado! 
    -->

    <fileserve>1</fileserve>

    <!-- set the mountpoint for a shoutcast source to use, the default if not
         specified is /stream but you can change it here if an alternative is
         wanted or an extension is required
    <shoutcast-mount>/live.nsv</shoutcast-mount>
    -->

    <paths>
		<!-- basedir is only used if chroot is enabled -->
        <basedir>/usr/share/icecast2</basedir>

        <!-- Note that if <chroot> is turned on below, these paths must both
             be relative to the new root, not the original root -->
        <logdir>/var/log/icecast2</logdir>
        <webroot>/usr/share/icecast2/web</webroot>
        <adminroot>/usr/share/icecast2/admin</adminroot>
        <!-- <pidfile>/usr/share/icecast2/icecast.pid</pidfile> -->

        <!-- Aliases: treat requests for 'source' path as being for 'dest' path
             May be made specific to a port or bound address using the "port"
             and "bind-address" attributes.
          -->
        <!--
        <alias source="/foo" dest="/bar"/>
          -->
        <!-- Aliases: can also be used for simple redirections as well,
             this example will redirect all requests for http://server:port/ to
             the status page
          -->
        <alias source="/" dest="/status.xsl"/>
    </paths>

    <logging>
        <accesslog>access.log</accesslog>
        <errorlog>error.log</errorlog>
        <!-- <playlistlog>playlist.log</playlistlog> -->
      	<loglevel>4</loglevel> <!-- 4 Debug, 3 Info, 2 Warn, 1 Error -->
    </logging>

    <security>
        <chroot>0</chroot>
        <changeowner>
            <user>icecast2</user>
            <group>nogroup</group>
        </changeowner>
    </security>
</icecast>