Re: add-in IDE and/or SATA card recommendations

Steve Browne <[email protected]>
Newsgroups gmane.org.user-groups.nmlug
Message-ID <[email protected]>
Ed Heron wrote:
>   So, I've got this Dell PowerEdge 2500 with SCSI hardware RAID and I don't 
> have any interest in putting SCSI drives in it.  It doesn't have standard 
> IDE or SATA interfaces, so I'm looking for some recommendations on some 
> relatively inexpensive IDE and SATA cards that Linux likes.
I recommend a Syba card. You can see their current products at 
http://www.syba.com/Default/En and then google-shop. I use a model 
SD-SA2PEX-2IR PCI-Express to SATA II for two drives (I'm assuming there 
is a PCI-X16 bus), which many online vendors stock. Inexpensive as 
things go.

Steve

-- 
Stephen B. Browne
[email protected]
"Ubi bene, ibi patria."

_______________________________________________
NMLUG mailing list
[email protected]
http://lists.b9.com/cgi-bin/mailman/listinfo/nmlug
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.