[cisco] Re: remote console

On Thu, 3 Jul 2003 00:03:28 +0300, "Mihai CHELARU"
<[email protected]> said:
> Merge vreo 20m prin cat5e. Mai mult n-am incercat.

am pus pe un gigel sa faca testul, ca tot nu are ce face.

dar eu am incercat sa pun un modem pe aux dar nu vrea sa mearga, nu am
centrala telefonica, deci cablul telefonic il bag direct in alt modem,
confuigul din router este:

modemcap entry MyModem:MSC=&FS0=0
line aux 0
 password cisco
 login
 modem InOut
 modem autoconfigure type MyModem
 transport input all
 speed 38400
 flowcontrol hardware

cand pornesc modemul zice:

1d00h: TTY97: CTS went down on IDLE line
1d00h: TTY97: CTS came up on IDLE line
1d00h: TTY97: DSR came up
1d00h: tty97: Modem: IDLE->(unknown)
1d00h: TTY97: EXEC creation
1d00h: TTY97: set timer type 10, 30 seconds
1d00h: TTY97: DSR was dropped
1d00h: TTY97: Set DTR to 0
1d00h: TTY97: Quickly dropping DTR
1d00h: tty97: Modem: READY->HASPROC
1d00h: TTY97: set timer type 10, 30 seconds
1d00h: TTY97: set timer type 10, 30 seconds
1d00h: TTY97: Line reset by "Exec"
1d00h: TTY97: Modem: HASPROC->HANGUP
1d00h: TTY97: no timer type 0 to destroy
1d00h: TTY97: no timer type 1 to destroy
1d00h: TTY97: no timer type 3 to destroy
1d00h: TTY97: no timer type 4 to destroy
1d00h: TTY97: no timer type 2 to destroy
1d00h: TTY97: dropping DTR, hanging up
1d00h: TTY97: Set DTR to 0
1d00h: tty97: Modem: HANGUP->IDLE
1d00h: TTY97: restoring DTR
1d00h: TTY97: Set DTR to 1
1d00h: TTY97: autoconfigure probe started
1d00h: TTY97: detection speed (115200) response ---OK---
1d00h: TTY97: Modem command:  --AT&FS0=0--
1d00h: TTY97: Modem configuration succeeded
1d00h: TTY97: Detected modem speed 115200
1d00h: TTY97: Done with modem configuration

pe altul in hyperterm bag
atz
OK
atx1dp1
NO CARRIER

pe unde e buba???

C
>