[cisco] Re: Alegere router cisco - am adaugat si scriptul
"Ciprian Niculescu" <[email protected]> Thu, 02 Oct 2003 15:12:35 +0100
| Newsgroups | gmane.org.user-groups.rlug.general,gmane.org.user-groups.rlug.cisco |
|---|---|
| Message-ID | <[email protected]> |
tc -s -d qdisc ls dev eth0 si 1 tc -s -d class ls dev eth0 si 1 tc -s -d filter ls dev eth0 si 1 ca din asta personal nu inteleg nimic C On Thu, 2 Oct 2003 16:00:48 +0300, "Laurentiu Matei" <[email protected]> said: > Acesta este scriptul pe care il folosesc impreuna cu HTB: > Ps: am facut shaping atat pentru traficul care intra cat si pt cel care > iese > (cineva spunea ca merge numai pentru ceea ce intra....). Banda > disponibila > este 512kbps. > > # simple config file > > class class_1 { > > bandwidth 320; > > limit 500; > > burst 2; > > priority 1; > > client client_0_in { > > bandwidth 100; > > limit 105; > > burst 2; > > priority 1; > > dst { > > real IP voip/32; > > }; > > }; > > client client_0_out { > > bandwidth 100; > > limit 110; > > burst 2; > > priority 1; > > src { > > real IP voip/32; > > }; > > }; > > client client_1_in { > > bandwidth 42; > > limit 136; > > burst 2; > > priority 2; > > dst { > > LAN IP/32; > > }; > > }; > > client client_1_out { > > bandwidth 42; > > limit 136; > > burst 2; > > priority 2; > > src { > > LAN IP/32; > > }; > > }; > > client client_2_in { > > bandwidth 40; > > limit 96; > > burst 2; > > priority 3; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_2_out { > > bandwidth 40; > > limit 96; > > burst 2; > > priority 3; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_3_in { > > bandwidth 20; > > limit 24; > > burst 2; > > priority 4; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_3_out { > > bandwidth 20; > > limit 24; > > burst 2; > > priority 4; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_4_in { > > bandwidth 24; > > limit 48; > > burst 2; > > priority 5; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_4_out { > > bandwidth 24; > > limit 48; > > burst 2; > > priority 5; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_5_in { > > bandwidth 20; > > limit 24; > > burst 2; > > priority 6; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_5_out { > > bandwidth 20; > > limit 24; > > burst 2; > > priority 6; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_6_in { > > bandwidth 24; > > limit 32; > > burst 2; > > priority 7; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_6_out { > > bandwidth 24; > > limit 32; > > burst 2; > > priority 7; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_7_in { > > bandwidth 20; > > limit 20; > > burst 2; > > priority 8; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_7_out { > > bandwidth 20; > > limit 20; > > burst 2; > > priority 8; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_8_in { > > bandwidth 10; > > limit 10; > > burst 2; > > priority 9; > > dst { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > client client_8_out { > > bandwidth 10; > > limit 10; > > burst 2; > > priority 9; > > src { > > LAN IP/32; > > LAN IP/32; > > LAN IP/32; > > }; > > }; > > }; > > class default { bandwidth 5; }; > > > > # end of testcfg > > > > Laurentiu. > > >