[cisco] Re: bgp export ????
Dan Nae <[email protected]> Wed, 12 May 2004 22:21:15 +0200
| Newsgroups | gmane.org.user-groups.rlug.general,gmane.org.user-groups.rlug.cisco |
|---|---|
| Message-ID | <[email protected]> |
Esti sigur ca ai rutele alea in tabela? un show ip route sa ne convingem si noi. Ciprian Niculescu wrote: >am o asamenea configuratie de ce nu export toate rutele???? >la randul meu rutele le invat prin ospf si sunt vreo 200 clase C, din >aceeasi subclasa B, care pana acum o anuntam pe toata si mergea, > >am incercat si cu "auto-summary", daca fac redistribute ospf in bgp >merge, si probabil apoi pot sa fac agregate > >ideii ceva??? > >router bgp 65002 > no synchronization > bgp log-neighbor-changes > network 1.1.0.0 mask 255.255.248.0 > network 1.1.10.0 mask 255.255.255.0 > network 1.1.11.0 mask 255.255.255.0 > network 1.1.32.0 mask 255.255.224.0 > network 1.1.64.0 mask 255.255.192.0 > network 1.1.224.0 mask 255.255.248.0 > network 1.1.250.0 mask 255.255.255.0 > neighbor 19.25.11.16 remote-as 20xxx > no auto-summary >! >rt-vthd#sh ip bgp neighbors 19.25.11.16 advertised-routes >BGP table version is 3683, local router ID is 10.9.0.1 >Status codes: s suppressed, d damped, h history, * valid, > best, i - >internal, > r RIB-failure, S Stale >Origin codes: i - IGP, e - EGP, ? - incomplete > > Network Next Hop Metric LocPrf Weight Path >*> 1.1.10.0/24 1.1.11.1 3 32768 i >*> 1.1.11.0/24 0.0.0.0 0 32768 i >*> 1.1.224.0/21 1.1.11.40 5 32768 i >*> 1.1.250.0/24 0.0.0.0 0 32768 i > > > >