[cisco] rsh - Cisco UBR 7100

Salut.
Cisco:
#show version
Cisco Internetwork Operating System Software
IOS (tm) EGR Software (UBR7100-IK1S-M), Version 12.1(12c)EC1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 19-Jul-02 11:48 by yiyan
Image text-base: 0x60008950, data-base: 0x618B0000

ROM: System Bootstrap, Version 12.0(5r)XE2, RELEASE SOFTWARE (fc1)
BOOTLDR: EGR Software (UBR7100-BOOT-M), Version 12.1(7)EC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

cmts uptime is 21 hours, 14 minutes
System returned to ROM by reload at 16:10:08 UTC Tue May 18 2004
System restarted at 16:11:44 UTC Tue May 18 2004
System image file is "disk0:ubr7100-ik1s-mz.121-12c.EC1.bin"

cisco uBR7111 (EGR) processor (revision A) with 122880K/73728K bytes of memory.
Processor board ID 30040887
R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Cable Modem network interface(s)
125K bytes of non-volatile configuration memory.

47040K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

#sh ru
ip rcmd remote-host user 192.168.0.3 root enable
ip rcmd remote-username user
___

Incerc acum ... 

root]# rsh -l user 192.168.0.1 'show clock'
192.168.0.1: Connection refused
[root@northrend root]#

Unde ar putea fi problema ?

Multumesc.