[cisco] Re: rsh - Cisco UBR 7100

ip rcmd rsh-enable
si mai pune si
no ip rcmd domain-lookup

On Wed, 19 May 2004, Irimia Suleapa wrote:

> Salut.
> Cisco:
> #show version
> Cisco Internetwork Operating System Software
> IOS (tm) EGR Software (UBR7100-IK1S-M), Version 12.1(12c)EC1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Fri 19-Jul-02 11:48 by yiyan
> Image text-base: 0x60008950, data-base: 0x618B0000
>
> ROM: System Bootstrap, Version 12.0(5r)XE2, RELEASE SOFTWARE (fc1)
> BOOTLDR: EGR Software (UBR7100-BOOT-M), Version 12.1(7)EC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>
> cmts uptime is 21 hours, 14 minutes
> System returned to ROM by reload at 16:10:08 UTC Tue May 18 2004
> System restarted at 16:11:44 UTC Tue May 18 2004
> System image file is "disk0:ubr7100-ik1s-mz.121-12c.EC1.bin"
>
> cisco uBR7111 (EGR) processor (revision A) with 122880K/73728K bytes of memory.
> Processor board ID 30040887
> R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
> Last reset from power-on
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 1 Cable Modem network interface(s)
> 125K bytes of non-volatile configuration memory.
>
> 47040K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
> 8192K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x2102
>
> #sh ru
> ip rcmd remote-host user 192.168.0.3 root enable
> ip rcmd remote-username user
> ___
>
> Incerc acum ...
>
> root]# rsh -l user 192.168.0.1 'show clock'
> 192.168.0.1: Connection refused
> [root@northrend root]#
>
> Unde ar putea fi problema ?
>
> Multumesc.
>
>
>

Tim
---
Be different. Think.