Re: Error installing Terminator on macOS

On 21 March 2020 at 00:12:33, Carl Caulkett ([email protected]) wrote:

I updated the command-line tools to 11.3.1. This alone did not fix the
problem. The output was the same as before.

The output of `xcrun --sdk macosx --show-sdk-path` is
`/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk`

Finally, I made the change to `
/sw/fink/dists/stable/main/finkinfo/languages/python27.info` and ran the
build again. This time it lasted much longer and, judging by the fact that
no errors were shown at the end, I think the build was successful.
<http://python27.info/>

It would have been nice to get a confirmation message along the lines
of “Congratulations,
the installation of Terminator was successful”, but maybe I’ve just been
spoiled by whizz-bang graphical macOS installers!

I then tried trying to run `terminator` from the command-line. I received
the message:

`/sw/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning:
could not open display
  warnings.warn(str(e), _gtk.Warning)
You need to run terminator in an X environment. Make sure $DISPLAY is
properly set`

I think this indicates that terminator did, indeed, build successfully, and
that the message is just a configuration issue, which, quite frankly can
wait until tomorrow to be addressed!

Thanks for your help, Hanspeter!

Cheers,
Carl

On 20 March 2020 at 21:49:49, Hanspeter Niederstrasser (
[email protected]) wrote:

On 3/19/20 3:04 PM, Carl Caulkett wrote:
> MacOS 10.14.6
>
> Package manager version: 0.45.0
> Distribution version: selfupdate-rsync Thu Mar 19 17:58:04 2020, 10.14.5,
> x86_64
> Trees: local/main stable/main
> Xcode.app: 11.3.1
> Xcode command-line tools: 10.3.0.0.1.1562985497
> Max. Fink build jobs: 8
>
> I tried to install Terminator using the command `fink install terminator
`.
> After a lengthy process, an error message was returned. I haven’t posted
> the full build report because there was literally pages and pages,
although
> I can if necessary. This is where the output seemed to start indicating
> errors rather than warnings…
>
> gcc -L/sw/lib -bundle
> /sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/libpython2.7.dylib
> -L/sw/lib -L/sw/lib -fno-strict-aliasing -Wno-nullability-completeness
> -DNDEBUG -g -fwrapv -fwrapv -O3 -Wall -Wstrict-prototypes -I. -IInclude
> -I./Include -I/sw/include -I/sw/include/ncursesw
>
-I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/include

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/_ctypes.o

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/callbacks.o

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/callproc.o

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/stgdict.o

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/cfield.o

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/malloc_closure.o

>
build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/darwin/dlfcn_simple.o

> -L/sw/lib -L. -lffi -ldl -o build/lib.macosx-10.14-x86_64-2.7/_ctypes.so
>
> Python build finished, but the necessary bits to build these modules were
> not found:
> bsddb185 dl imageop
> linuxaudiodev ossaudiodev spwd
> sunaudiodev
> To find the necessary bits, look in setup.py in detect_modules() for the
> module's name.
> (Fink package build should have 7 missing)
>
>
> Failed to build these modules:
> _scproxy readline
>
> make: *** [sharedmods] Error 1
> ### execution of /tmp/fink.NVmmA failed, exit code 2
> ### execution of /tmp/fink.UQP2k failed, exit code 2
> Removing runtime build-lock...
> Removing build-lock package...
> /sw/bin/dpkg-lockwait -r fink-buildlock-python27-2.7.17-1
> (Reading database ... 35311 files and directories currently installed.)
> Removing fink-buildlock-python27-2.7.17-1 ...
> Updating the list of locally available binary packages.
> Scanning dists/stable/main/binary-darwin-x86_64
> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/imlib2-shlibs_1.5.1-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/imlib2_1.5.1-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/jasper-bin_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/jiv_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/libjasper.1-shlibs_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/libjasper.1_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/graphics/libjasper1-bin_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/text/docbook-bundle_4.1.2-1004_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/x11/freeglut2-shlibs_3.0.0-3_darwin-x86_64.deb

> New package:
>
dists/stable/main/binary-darwin-x86_64/x11/freeglut2_3.0.0-3_darwin-x86_64.deb

> Failed: phase compiling: python27-2.7.17-1 failed
>
> Before reporting any errors, please run "fink selfupdate" and try again.
> Also try using "fink configure" to set your maximum build jobs to 1 and
> attempt to build the package again.
> If you continue to have issues, please check to see if the FAQ on Fink's
> website solves the problem. If not, ask on one (not both, please) of
> these mailing lists:
>
> The Fink Users List <[email protected]>
> The Fink Beginners List <[email protected]>,
>
> with a carbon copy to the maintainer:
>
> Daniel Johnson <[email protected]>
>
> Note that this is preferable to emailing just the maintainer directly,
> since most fink package maintainers do not have access to all possible
> hardware and software configurations.
>
> Please try to include the complete error message in your report. This
> generally consists of a compiler line starting with e.g. "gcc" or "g++"
> followed by the actual error output from the compiler.
>
> Also include the following system information:
> Package manager version: 0.45.0
> Distribution version: selfupdate-rsync Thu Mar 19 17:58:04 2020, 10.14.5,
> x86_64
> Trees: local/main stable/main
> Xcode.app: 11.3.1
> Xcode command-line tools: 10.3.0.0.1.1562985497
> Max. Fink build jobs: 8

1) You have a mismatch between Xcode.app and the command line tools. Do
you still get this error after updating the command line tools to 11.3.1 ?
2) If you still get the error (the actual failure is with python27),
there are reports that the problem is with the MacOSX10.14.sdk, but that
was from a 10.15 user.
https://github.com/fink/fink-distributions/issues/498#issuecomment-569372123

What's the output of `xcrun --sdk macosx --show-sdk-path` ?

3) Lastly, if you edit the file
/sw/fink/dists/stable/main/finkinfo/languages/python27.info so that line
#86 looks like this (lose the last -I flag):

export CPPFLAGS="-I%p/include -I%p/include/ncursesw"

Does that change fix the build?

Hanspeter

_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners