Re: fink update

This is fink configure….

[~] fink configure
Password:

OK, I'll ask you some questions and update the configuration file in '/opt/sw/etc/fink.conf'.

In what additional directory should Fink look for downloaded tarballs? (use the absolute pathname only) []

Which directory (absolute pathname) should Fink use to build packages? (If you don't know what this means, it is safe to leave it at its default.) []

Downloading packages from the binary distribution is currently only possible
if Fink is installed at '/sw'.

=> Setting UseBinaryDist to 'false'

Note: As of the OS X 10.7 distribution, fink no longer has a separate "unstable" tree. All development and releases happen in the "stable" tree, the only public tree
that exists.

Fink build user settings
Fink's build user is currently set up. Do you want to reconfigure it? [y/N]

(1)	Quiet (do not show download statistics)
(2)	Low (do not show tarballs being expanded)
(3)	Medium (will show almost everything)
(4)	High (will show everything)

How verbose should Fink be? [2]

Proxy/Firewall settings
Enter the URL of the HTTP proxy to use, or 'none' for no proxy. The URL should start with http:// and may contain username, password, and/or port specifications. Note
that this value will be visible to all users on your computer.
Example, http://username:password@hostname:port
Your proxy: [none]
Enter the URL of the FTP proxy to use, or 'none' for no proxy. The URL should start with http:// and may contain username, password, and/or port specifications. Note
that this value will be visible to all users on your computer.
Example, http://username:password@hostname:port
Your proxy: [none]
Use passive mode FTP transfers (to get through a firewall)? [Y/n]

Enter the maximum number of simultaneous build jobs. In general, Fink will build packages faster on systems with multiple CPUs/cores if you allow it to spawn jobs in
parallel. You have 12 active CPUs/cores on your system.
Maximum number of simultaneous build jobs: [12]

Mirror selection
All mirrors are set. Do you want to change them? [y/N]

Writing updated configuration to '/opt/sw/etc/fink.conf'...

ES
On 10 Jun 2020, 04:23 +0700, Alexander Hansen <[email protected]>, wrote:
>
>
> > On Jun 9, 2020, at 07:22, [email protected] wrote:
> >
> > Dear friends.  Help.
> >
> > I’ve installed fink to fresh /sw directory using InstallFink.tool. It has been perfectly installed! Selfupdate was without any errors.
> > Thanks for this nice tool.
> >
> > Fink scanpackages shows
> >
> > [~] fink scanpackages
> > Updating the list of locally available binary packages.
> > Scanning dists/local/main/binary-darwin-x86_64
> > Scanning dists/stable/main/binary-darwin-x86_64
> >
> > Setup is also correct.
> >
> > And when I tried to install meld, all packages downloaded well, but then I have
> >
> > [~] fink install meld
> > Information about 10251 packages read in 1 seconds.
> >
> > fink needs help picking an alternative to satisfy a virtual dependency. The candidates:
> >
> > (1)	w3m: Text-mode WWW browser with tables/frames
> > (2)	lynx: Console based web browser
> > (3)	elinks: Text-mode web-browser (felinks fork)
> >
> > Pick one: [1]
> > The following package will be installed or updated:
> >  meld
> > The following 183 additional packages will be installed:
> >  atk1 atk1-shlibs autoconf2.6 automake1.15 automake1.15-core blt-dev blt-shlibs cairo cairo-shlibs class-c3-pm5184 cmake cpan-meta-pm5184
> >  cpan-meta-requirements-pm5184 cython-py27 daemonic data-optlist-pm5184 data-section-pm5184 dbus dbus-glib1.2-dev dbus-glib1.2-shlibs
> >  dbus1.3-dev dbus1.3-shlibs desktop-file-utils docbook-bundle docbook-dsssl-ldp docbook-dsssl-nwalsh docbook-dtd docbook-xsl dos2unix
> >  extutils-makemaker-pm5184 fontconfig-config fontconfig2-dev fontconfig2-shlibs freeglut2 freeglut2-shlibs freetype219 freetype219-shlibs gdbm4
> >  gdbm4-shlibs glew1.13 glew1.13-shlibs glib2-dev glib2-shlibs gtk+2 gtk+2-dev gtk+2-shlibs gtk-doc gtksourceview2-dev gtksourceview2-shlibs
> >  help2man-perl5184 imlib2 imlib2-shlibs info intltool40 itstool launch libdatrie1 libdatrie1-shlibs libffi6 libffi6-shlibs libglade2
> >  libglade2-shlibs libid3tag libid3tag-shlibs libidn2.0-dev libidn2.0-shlibs libjasper.1 libjasper.1-shlibs libjbig libjbig-shlibs libjpeg-bin
> >  libjpeg9 libjpeg9-shlibs liblzma5 liblzma5-shlibs libncursesw5 libncursesw5-shlibs libpng16 libpng16-shlibs librarian.08-shlibs libsigsegv2
> >  libsigsegv2-shlibs libthai libthai-dev libthai-shlibs libtiff5 libtiff5-shlibs libtool2 libtool2-shlibs libunistring2 libunistring2-shlibs
> >  libxml2 libxml2-bin libxml2-py27 libxml2-shlibs libxslt libxslt-bin libxslt-shlibs locale-gettext-pm5184 lzo2 lzo2-shlibs m4 module-build-pm
> >  module-build-pm5184 module-metadata-pm5184 mro-compat-pm5184 numpy-py27 openjade opensp-bin opensp5-dev opensp5-shlibs openssl110-dev
> >  openssl110-shlibs package-generator-pm pango1-xft2-ft219 pango1-xft2-ft219-dev pango1-xft2-ft219-shlibs par-dist-pm params-util-pm5184
> >  passwd-configs passwd-core passwd-messagebus perl-ostype-pm5184 pixman pixman-shlibs pkgconfig pkgconfig-common po4a pod-readme-pm
> >  podlators-pm pycairo-py27 pycairo-py27-dev pydbus-py27 pygobject2-py27 pygobject2-py27-dev pygobject2-py27-shlibs pygtk2-gtk-py27
> >  pygtk2-gtk-py27-dev pygtksourceview2-py27 pykg-config python27 python27-shlibs rarian rarian-compat readline6 readline6-shlibs readline7
> >  readline7-shlibs regexp-common-pm scalar-list-utils-pm5184 sed setuptools-tng-py27 sgml-entities-iso8879 sgmls-pm shared-mime-info
> >  software-license-pm5184 sqlite3-dev sqlite3-shlibs sub-exporter-pm5184 sub-install-pm sub-name-pm5184 tcltk tcltk-dev tcltk-shlibs
> >  term-readkey-pm5184 test-failwarnings-pm test-harness-pm5184 test-simple-pm5184 texi2html texi2html-perl5162 texinfo text-template-pm trietool
> >  try-tiny-pm version-pm5184 w3m xdg-base xft2-dev xft2-shlibs xinitrc xml-parser-pm5184 xmlto xz
> > Default answer will be chosen in 60 seconds...
> > Do you want to continue? [Y/n]
> > Setting runtime build-lock...
> > dpkg-deb -b /opt/sw/src/fink.build/root-fink-buildlock-launch-1.2.5-1 /opt/sw/src/fink.build
> > dpkg-deb: building package `fink-buildlock-launch-1.2.5-1' in `/opt/sw/src/fink.build/fink-buildlock-launch-1.2.5-1_2020.06.09-19.56.58_darwin-x86_64.deb'.
> > Installing build-lock package...
> > /opt/sw/bin/dpkg-lockwait -i /opt/sw/src/fink.build/fink-buildlock-launch-1.2.5-1_2020.06.09-19.56.58_darwin-x86_64.deb
> > Selecting previously deselected package fink-buildlock-launch-1.2.5-1.
> > (Reading database ... 7357 files and directories currently installed.)
> > Unpacking fink-buildlock-launch-1.2.5-1 (from .../fink-buildlock-launch-1.2.5-1_2020.06.09-19.56.58_darwin-x86_64.deb) ...
> > Setting up fink-buildlock-launch-1.2.5-1 (2020.06.09-19.56.58) ...
> >
> > WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
> > WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
> > WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
> > sudo -u nobody [ENV] sh -c /tmp/fink.MICAi
> > env LANG=C LC_ALL=C /opt/sw/bin/tar --no-same-owner --no-same-permissions -xf /opt/sw/src/launch-1.2.5.tar.gz
> > WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
> > sudo -u nobody [ENV] sh -c /tmp/fink.T25Wu
> > ls -la
> > total 416
> > drwx------ 17 nobody nobody 544 Apr 2 2018 .
> > drwxr-xr-x 3 nobody nobody 96 Jun 9 19:56 ..
> > -rw-r--r-- 1 nobody nobody 426 Apr 2 2018 ._Info.plist
> > -rw-r--r-- 1 nobody nobody 120 Apr 2 2018 ._LICENSE
> > -rw-r--r-- 1 nobody nobody 120 Apr 2 2018 ._README
> > -rw-r--r-- 1 nobody nobody 120 Apr 2 2018 ._launch.1
> > -rwx------ 1 nobody nobody 208 Apr 2 2018 ._launch.xcodeproj
> > -rw------- 1 nobody nobody 333 Apr 2 2018 ._main.m
> > -rw-r--r-- 1 nobody nobody 388 Apr 2 2018 Info.plist
> > -rw-r--r-- 1 nobody nobody 1507 Apr 2 2018 LICENSE
> > -rw-r--r-- 1 nobody nobody 12867 Apr 2 2018 README
> > -rwxr-xr-x 1 nobody nobody 88340 Apr 2 2018 launch
> > drwx------ 16 nobody nobody 512 Jun 9 19:56 launch-1.2.5
> > -rw-r--r-- 1 nobody nobody 4278 Apr 2 2018 launch.1
> > drwx------ 3 nobody nobody 96 Jun 9 19:56 launch.xcodeproj
> > -rw------- 1 nobody nobody 57847 Apr 2 2018 main.m
> > -rwx------ 1 nobody nobody 867 Oct 1 2017 package-launch.sh
> > perl -pi -e 's#10.8#10.9#g' launch.xcodeproj/project.pbxproj
> > WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
>
> Start with the above.  Building as “nobody” can result in weird permissions issues.
>
> > sudo -u nobody [ENV] sh -c /tmp/fink._OdTv
> > /tmp/fink.9kCnn
> > #!/bin/sh -ev
> > 	mv launch launch.orig
> > 	/usr/bin/xcodebuild -UsePerConfigurationBuildLocations=NO SYMROOT=. OBJROOT=.
> > Command line invocation:
> >  /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild -UsePerConfigurationBuildLocations=NO SYMROOT=. OBJROOT=.
> >
> > User defaults from command line:
> >  UsePerConfigurationBuildLocations = NO
> >
> > Build settings from command line:
> >  OBJROOT = .
> >  SYMROOT = .
> >
> > 2020-06-09 19:57:00.408 xcodebuild[7736:4177124] Error Domain=com.apple.CoreSimulator.SimError Code=160 "Unable to determine SimDeviceSet, set_path=(null)" UserInfo={NSLocalizedDescription=Unable to determine SimDeviceSet, set_path=(null), NSUnderlyingError=0x7fd1896d8a40 {Error Domain=NSPOSIXErrorDomain Code=12 "Cannot allocate memory" UserInfo={NSLocalizedFailureReason=Allocation or initialization failed., NSLocalizedDescription=Failed to initialize simulator device set.}}}
> > 2020-06-09 19:57:00.409 xcodebuild[7736:4177124] iOSSimulator: [SimServiceContext defaultDeviceSetWithError:] returned nil (Error Domain=com.apple.CoreSimulator.SimError Code=160 "Failed to initialize simulator device set." UserInfo={NSLocalizedFailureReason=Failed to subscribe to notifications from CoreSimulatorService., NSLocalizedDescription=Failed to initialize simulator device set., NSUnderlyingError=0x7fd1896d8e80 {Error Domain=com.apple.CoreSimulator.SimError Code=160 "Unable to determine SimDeviceSet, set_path=(null)" UserInfo={NSLocalizedDescription=Unable to determine SimDeviceSet, set_path=(null), NSUnderlyingError=0x7fd1896d8a40 {Error Domain=NSPOSIXErrorDomain Code=12 "Cannot allocate memory" UserInfo={NSLocalizedFailureReason=Allocation or initialization failed., NSLocalizedDescription=Failed to initialize simulator device set.}}}}}). Simulator device support disabled.
> > 2020-06-09 19:57:00.418 xcodebuild[7736:4177061] [MT] IDELogStore: Failed to open log store at /var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Build
> > 2020-06-09 19:57:00.418 xcodebuild[7736:4177061] [MT] IDELogStore: Failed to open Build log store: Error Domain=IDEFoundationErrorDomain Code=1 "Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Build': (513) You donБ─≥t have permission to save the file Б─°BuildБ─² in the folder Б─°LogsБ─²." UserInfo={NSLocalizedDescription=Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Build': (513) You donБ─≥t have permission to save the file Б─°BuildБ─² in the folder Б─°LogsБ─².}. User info: {
> >  NSLocalizedDescription = "Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Build': (513) You don\U2019t have permission to save the file \U201cBuild\U201d in the folder \U201cLogs\U201d.";
> > }.
> > 2020-06-09 19:57:00.427 xcodebuild[7736:4177061] [MT] IDELogStore: Failed to open log store at /var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Package
> > 2020-06-09 19:57:00.427 xcodebuild[7736:4177061] [MT] IDELogStore: Failed to open Package log store: Error Domain=IDEFoundationErrorDomain Code=1 "Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Package': (513) You donБ─≥t have permission to save the file Б─°PackageБ─² in the folder Б─°LogsБ─²." UserInfo={NSLocalizedDescription=Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Package': (513) You donБ─≥t have permission to save the file Б─°PackageБ─² in the folder Б─°LogsБ─².}. User info: {
> >  NSLocalizedDescription = "Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Package': (513) You don\U2019t have permission to save the file \U201cPackage\U201d in the folder \U201cLogs\U201d.";
> > }.
> > 2020-06-09 19:57:00.431 xcodebuild[7736:4177061] [MT] IDELogStore: Failed to open log store at /var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Test
> > 2020-06-09 19:57:00.431 xcodebuild[7736:4177061] [MT] IDELogStore: Failed to open Test log store: Error Domain=IDEFoundationErrorDomain Code=1 "Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Test': (513) You donБ─≥t have permission to save the file Б─°TestБ─² in the folder Б─°LogsБ─²." UserInfo={NSLocalizedDescription=Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Test': (513) You donБ─≥t have permission to save the file Б─°TestБ─² in the folder Б─°LogsБ─².}. User info: {
> >  NSLocalizedDescription = "Unable to create log store directory at '/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf/Logs/Test': (513) You don\U2019t have permission to save the file \U201cTest\U201d in the folder \U201cLogs\U201d.";
> > }.
> > 2020-06-09 19:57:00.696 xcodebuild[7736:4177061] [MT] DVTAssertions: Warning in /Library/Caches/com.apple.xbs/Sources/IDEFrameworks/IDEFrameworks-16139/IDEFoundation/Buildables/IDEWorkspaceArena.m:1131
> > Details: Failed to create workspace arena at <DVTFilePath:0x7fd18d771170:'/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf'>: Error Domain=NSCocoaErrorDomain Code=513 "You donБ─≥t have permission to save the file Б─°launch-ehjqpeknmgsahvbptwsevkqbqpyfБ─² in the folder Б─°DerivedDataБ─²." UserInfo={NSFilePath=/var/empty/Library/Developer/Xcode/DerivedData/launch-ehjqpeknmgsahvbptwsevkqbqpyf, NSUnderlyingError=0x7fd18ea832b0 {Error Domain=NSPOSIXErrorDomain Code=1 "Operation not permitted"}}
> > Object: <IDEWorkspaceArena: 0x7fd18d75dd80>
> > Method: -createWorkspaceArenaFolderIfNecessary
> > Thread: <NSThread: 0x7fd189007b30>{number = 1, name = main}
> > Please file a bug at https://feedbackassistant.apple.com with this warning message and any useful information you can provide.
> > /tmp/fink.9kCnn: line 3: 7736 Illegal instruction: 4 /usr/bin/xcodebuild -UsePerConfigurationBuildLocations=NO SYMROOT=. OBJROOT=.
> > ### execution of /tmp/fink.9kCnn failed, exit code 132
> > ### execution of /tmp/fink._OdTv failed, exit code 132
> > Removing runtime build-lock...
> > Removing build-lock package...
> > /opt/sw/bin/dpkg-lockwait -r fink-buildlock-launch-1.2.5-1
> > (Reading database ... 7358 files and directories currently installed.)
> > Removing fink-buildlock-launch-1.2.5-1 ...
> > Failed: phase compiling: launch-1.2.5-1 failed
> >
> > Before reporting any errors, please run "fink selfupdate" and try again.
> > Also try using "fink configure" to set your maximum build jobs to 1 and
> > attempt to build the package again.
> > If you continue to have issues, please check to see if the FAQ on Fink's
> > website solves the problem. If not, ask on one (not both, please) of
> > these mailing lists:
> >
> > 	The Fink Users List <[email protected]>
> > 	The Fink Beginners List <[email protected]>.
> >
> > Please try to include the complete error message in your report. This
> > generally consists of a compiler line starting with e.g. "gcc" or "g++"
> > followed by the actual error output from the compiler.
> >
> > Also include the following system information:
> > Package manager version: 0.45.1
> > Distribution version: selfupdate-rsync Tue Jun 9 19:55:48 2020, 10.15, x86_64
> > Trees: local/main stable/main
> > Xcode.app: 11.5
> > Xcode command-line tools: 11.5.0.0.1.1588476445
> > Max. Fink build jobs: 12
> >
> > ES
>
> Run “fink configure” and post the output back here.  You really do need a fink-bld user, so try to make sure to turn on “fink’s build user” when prompted.
>
> --
> Alexander Hansen, Ph.D.
> Fink User Liaison
>

_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners