Re: fink update

But these line are still here

****************

Unpacking fink-buildlock-term-readkey-pm5184-2.37-1 (from .../fink-buildlock-term-readkey-pm5184-2.37-1_2020.06.12-10.14.41_darwin-x86_64.deb) ...
Setting up fink-buildlock-term-readkey-pm5184-2.37-1 (2020.06.12-10.14.41) ...

WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
sudo -u nobody [ENV] sh -c /tmp/fink.kRj6V
env LANG=C LC_ALL=C /opt/sw/bin/tar --no-same-owner --no-same-permissions -xf /opt/sw/src/TermReadKey-2.37.tar.gz
WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
sudo -u nobody [ENV] sh -c /tmp/fink.MaqTZ
ARCHFLAGS="-I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/System/Library/Perl/5.18/darwin-thread-multi-2level/CORE" /usr/bin/arch -x86_64 perl5.18 Makefile.PL PERL="/usr/bin/arch -x86_64 perl5.18" PREFIX=/opt/sw INSTALLPRIVLIB=/opt/sw/lib/perl5/5.18.4 INSTALLARCHLIB=/opt/sw/lib/perl5/5.18.4/darwin-thread-multi-2level INSTALLSITELIB=/opt/sw/lib/perl5/5.18.4 INSTALLSITEARCH=/opt/sw/lib/perl5/5.18.4/darwin-thread-multi-2level INSTALLMAN1DIR=/opt/sw/share/man/man1 INSTALLMAN3DIR=/opt/sw/share/man/man3 INSTALLSITEMAN1DIR=/opt/sw/share/man/man1 INSTALLSITEMAN3DIR=/opt/sw/share/man/man3 INSTALLBIN=/opt/sw/bin INSTALLSITEBIN=/opt/sw/bin INSTALLSCRIPT=/opt/sw/bin DEFINE=-MD
Checking if your kit is complete...
Looks good
Writing Makefile for Term::ReadKey
Writing MYMETA.yml and MYMETA.json
/usr/bin/make CC=gcc CXX=g++
/usr/bin/arch -x86_64 perl5.18 genchars.pl
Running Mkbootstrap for Term::ReadKey ()
chmod 644 ReadKey.bs
cp ReadKey.bs blib/arch/auto/Term/ReadKey/ReadKey.bs
chmod 644 blib/arch/auto/Term/ReadKey/ReadKey.bs


ES
On 11 Jun 2020, 22:06 +0700, [email protected], wrote:
> It runs for some minutes, but fails again. Long, long output… Below is the end .. May be something was earlier, but 1000s lines….
>
> *************
>
> Can't load 'blib/arch/auto/Term/ReadKey/ReadKey.bundle' for module Term::ReadKey: dlopen(blib/arch/auto/Term/ReadKey/ReadKey.bundle, 1): no suitable image found. Did find:
> 	file system relative paths not allowed in hardened programs at /System/Library/Perl/5.18/darwin-thread-multi-2level/DynaLoader.pm line 194.
>  at /System/Library/Perl/5.18/darwin-thread-multi-2level/DynaLoader.pm line 98.
> 	DynaLoader::croak('Can\'t load \'blib/arch/auto/Term/ReadKey/ReadKey.bundle\' fo...') called at /System/Library/Perl/5.18/darwin-thread-multi-2level/DynaLoader.pm line 194
> 	DynaLoader::bootstrap('Term::ReadKey') called at ReadKey_pm.PL line 515
> Bootstrapping the XS for blockoptions: make: *** [ReadKey.pm] Error 255
> ### execution of /usr/bin/make failed, exit code 2
> ### execution of /tmp/fink.JVzTc failed, exit code 2
> Removing runtime build-lock...
> Removing build-lock package...
> /opt/sw/bin/dpkg-lockwait -r fink-buildlock-term-readkey-pm5184-2.37-1
> (Reading database ... 8473 files and directories currently installed.)
> Removing fink-buildlock-term-readkey-pm5184-2.37-1 ...
> Updating the list of locally available binary packages.
> Scanning dists/stable/main/binary-darwin-x86_64
> New package: dists/stable/main/binary-darwin-x86_64/devel/pykg-config_1.3.0-3_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/devel/pkgconfig-common_3-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/database/sqlite3-dev_3.30.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/database/sqlite3_3.30.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/database/sqlite3-tcl_3.30.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/database/sqlite3-shlibs_3.30.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/database/sqlite3-analyzer_3.30.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/utils/lzma_5.2.4-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/utils/sed_4.7-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/utils/liblzma5_5.2.4-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/utils/xz_5.2.4-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/utils/liblzma5-shlibs_5.2.4-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/libffi6-shlibs_3.2.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/readline6-shlibs_6.3.8-2_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/readline7-shlibs_7.0.pl5-2_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/lzo2_2.10-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/libffi6_3.2.1-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/readline6_6.3.8-2_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/libsigsegv2-shlibs_2.6-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/libsigsegv2_2.6-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/lzo2-shlibs_2.10-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/readline7_7.0.pl5-2_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/par-dist-pm_0.49-2_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/regexp-common-pm_2013031301-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/podlators-pm_2.5.3-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/sub-name-pm5184_0.21-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/locale-gettext-pm5184_1.07-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/package-generator-pm_1.106-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/scalar-list-utils-pm5184_1.55-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/sub-install-pm_0.928-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/perl-ostype-pm5184_1.010-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/sgmls-pm_1.10-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/libs/perlmods/params-util-pm5184_1.07-2_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/text/opensp-bin_1.5.2-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/text/libunistring2-shlibs_0.9.9-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/text/sgml-entities-iso8879_1986-4_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/text/opensp5-shlibs_1.5.2-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/text/libunistring2_0.9.9-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/text/opensp5-dev_1.5.2-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/graphics/libjpeg9-shlibs_9c-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/graphics/libjpeg-bin_9c-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/graphics/libjpeg9_9c-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/graphics/libpng16-shlibs_1.6.37-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/graphics/libpng16_1.6.37-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/sound/libid3tag_0.15.1b-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/sound/libid3tag-shlibs_0.15.1b-5_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/base/passwd-messagebus_20131113-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/base/passwd-configs_20160421-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/base/passwd_20131113-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/base/passwd-core_20131113-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/base/libncursesw5_5.9-20110507-1_darwin-x86_64.deb
> New package: dists/stable/main/binary-darwin-x86_64/base/libncursesw5-shlibs_5.9-20110507-1_darwin-x86_64.deb
> Failed: phase compiling: term-readkey-pm5184-2.37-1 failed
>
> Before reporting any errors, please run "fink selfupdate" and try again.
> Also try using "fink configure" to set your maximum build jobs to 1 and
> attempt to build the package again.
> If you continue to have issues, please check to see if the FAQ on Fink's
> website solves the problem. If not, ask on one (not both, please) of
> these mailing lists:
>
> 	The Fink Users List <[email protected]>
> 	The Fink Beginners List <[email protected]>,
>
> with a carbon copy to the maintainer:
>
> 	Christian Schaffner <[email protected]>
>
> Note that this is preferable to emailing just the maintainer directly,
> since most fink package maintainers do not have access to all possible
> hardware and software configurations.
>
> Please try to include the complete error message in your report. This
> generally consists of a compiler line starting with e.g. "gcc" or "g++"
> followed by the actual error output from the compiler.
>
> Also include the following system information:
> Package manager version: 0.45.1
> Distribution version: selfupdate-rsync Tue Jun 9 19:55:48 2020, 10.15, x86_64
> Trees: local/main stable/main
> Xcode.app: 11.5
> Xcode command-line tools: 11.5.0.0.1.1588476445
> Max. Fink build jobs: 12
>
> ES
> On 11 Jun 2020, 21:50 +0700, [email protected], wrote:
> > Anyway, I make fink --no-build-as-nobody install launch and now it seems to be running!
> >
> > ES
> > On 11 Jun 2020, 21:27 +0700, Alexander Hansen <[email protected]>, wrote:
> > >
> > >
> > > > On Jun 11, 2020, at 00:17, [email protected] wrote:
> > > >
> > > > How I can get there to make as suggested by fink configure?
> > > >
> > > > WARNING: User and/or group 'fink-bld' not found! Falling back to user/group 'nobody'. Please run 'fink configure' to set up user 'fink-bld'.
> > > >
> > > > It does not suggest me any like that….
> > > >
> > > > ES
> > > > On 11 Jun 2020, 13:00 +0700, Alexander Hansen <[email protected]>, wrote:
> > >
> > > This is _exactly_ what I’ve been trying to fix with you. This is the “fink build user” that you were supposed to have fixed via “fink configure”.
> > >
> > > What do you get from “id fink-bld”. I don’t have the same error as you do and I have:
> > >
> > > % id fink-bld
> > > uid=600(fink-bld) gid=20(staff) groups=20(staff),12(everyone),61(localaccounts),600(fink-bld),701(com.apple.sharepoint.group.1),100(_lpoperator)
> > >
> > > If all else fails, you can use “fink --no-build-as-nobody install launch”, which should switch over to building as root and install that package.
> > > --
> > > Alexander Hansen, Ph.D.
> > > Fink User Liaison
> > >

_______________________________________________
Fink-beginners mailing list
[email protected]
List archive:
https://sourceforge.net/p/fink/mailman/fink-users/
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-beginners