Re: Yosemite

Hi Alexander,

Not sure if I should send this to you or on some mailing list. I did as you suggested: downloaded the development branch at halfdome, modified the Engine.pm file and ran inject.pl with the following unsuccessful ouput:

> sudo ./inject.pl
Creating fink tarball...
tar -cf /sw/src/fink-0.37.99.git.tar AUTHORS COPYING INSTALL INSTALL.html MANIFEST MANIFEST.SKIP Makefile NEWS README README.buildsystem README.html README.removing-fink-bld REVISION Release STYLE TODO USAGE USAGE.html VERSION bootstrap bootstrap-phase2.pl compiler_wrapper-10.6.in compiler_wrapper-10.7.in compiler_wrapper-10.9.in dpkg-checkall.sh fink-dpkg-status-cleanup.in fink-instscripts.in fink-scanpackages.in fink-virtual-pkgs.in fink.8.in fink.conf.5.in fink.csh fink.in fink.sh fink.shlibs g++-wrapper.in images/finkDoneFailed.png images/finkDonePassed.png images/finkPackageBuildFailed.png images/finkPackageBuildPassed.png images/finkPackageInstallationFailed.png images/finkPackageInstallationPassed.png images/finkPackageRemovalFailed.png images/finkPackageRemovalPassed.png inject.pl install.sh lockwait.in pathsetup.sh.in perlmod/Fink.pm.in perlmod/Fink/Base.pm perlmod/Fink/Bootstrap.pm perlmod/Fink/CLI.pm perlmod/Fink/Checksum.pm perlmod/Fink/Checksum/MD5.pm perlmod/Fink/Checksum/SHA1.pm perlmod/Fink/Checksum/SHA256.pm perlmod/Fink/Command.pm perlmod/Fink/Config.pm perlmod/Fink/Configure.pm perlmod/Fink/Engine.pm perlmod/Fink/Finally.pm perlmod/Fink/Finally/BuildConflicts.pm perlmod/Fink/Finally/Buildlock.pm perlmod/Fink/FinkVersion.pm.in perlmod/Fink/Mirror.pm perlmod/Fink/NetAccess.pm perlmod/Fink/Notify.pm perlmod/Fink/Notify/Growl.pm perlmod/Fink/Notify/QuickSilver.pm perlmod/Fink/Notify/Say.pm perlmod/Fink/Notify/Syslog.pm perlmod/Fink/Notify/XTerm.pm perlmod/Fink/Package.pm perlmod/Fink/PkgVersion.pm perlmod/Fink/Scanpackages.pm perlmod/Fink/SelfUpdate.pm perlmod/Fink/SelfUpdate/Base.pm perlmod/Fink/SelfUpdate/CVS.pm perlmod/Fink/SelfUpdate/point.pm perlmod/Fink/SelfUpdate/rsync.pm perlmod/Fink/Services.pm perlmod/Fink/Status.pm perlmod/Fink/SysState.pm perlmod/Fink/Text/DelimMatch.pm perlmod/Fink/Text/ParseWords.pm perlmod/Fink/Validation.pm perlmod/Fink/VirtPackage.pm postinstall.pl.in pre-build-test.sh readme.en.html readme.es.html readme.fr.html readme.ja.html readme.pt.html readme.ru.html readme.zh.html setup.sh shlibs.default.in t/00compile.t t/10features/users_groups.t t/10features/volume.t t/Base/initialize.t t/Base/param.t t/Base/param_boolean.t t/CLI/capture.t t/Command/cat.t t/Command/chowname.t t/Command/commands.t t/Command/du_sk.t t/Command/exports.t t/Command/failure.t t/Command/touch.t t/Config/exports.t t/Config/failure.t t/Config/flag.t t/Config/load_save.t t/Config/options.t t/Config/param.t t/Config/verbosity_level.t t/Engine/fetch.t t/Engine/p0.info t/Engine/p1.info t/Engine/p2.info t/Engine/p3.info t/Engine/p4.info t/Finally/buildlocks.t t/Finally/finally.t t/FinkVersion/exports.t t/FinkVersion/version.t t/Mirror/exports.t t/Notify/exports.t t/Package/duplicate_fullname_trees/epoch1/finkinfo/duplicate-fullname.info t/Package/duplicate_fullname_trees/epoch1again/finkinfo/duplicate-fullname.info t/Package/duplicate_fullname_trees/epoch2/finkinfo/duplicate-fullname.info t/Package/duplicate_fullnames.t t/PkgVersion/get_perl.t t/PkgVersion/get_ruby.t t/PkgVersion/get_splitoffs-tree/finkinfo/p1.info t/PkgVersion/get_splitoffs-tree/finkinfo/p2.info t/PkgVersion/get_splitoffs-tree/finkinfo/p3.info t/PkgVersion/get_splitoffs.t t/PkgVersion/mp3-info-pm-1.01-1.info t/PkgVersion/non-consecutive-test.info t/PkgVersion/non-consecutive-test2.info t/PkgVersion/non_consecutive_source.t t/PkgVersion/opengl-rb18.info t/PkgVersion/sed-4.0.5-1.info t/PkgVersion/xml-parser-pm560-2.31-5.info t/SelfUpdate/last_done.t t/SelfUpdate/subclasses.t t/Services/eval_conditional.t t/Services/execute_nonroot_okay.t t/Services/expand_percent.t t/Services/prepare_script.t t/Services/spec2struct.t t/Services/version_cmp.t t/Text/DelimMatch/DelimMatch.t t/Text/ParseWords/ParseWords.t t/Text/ParseWords/taint.t t/Validation/_filename_versioning_cmp.t t/Validation/exports.t t/basepath/etc/fink.conf t/testmore.pl update-packages/README update/Makefile.in.in update/config.guess update/config.sub update/ltconfig update/ltmain.sh
Copying package description(s)...
/bin/mv /sw/fink/dists/local/injected/finkinfo/fink.info /sw/fink/dists/local/injected/finkinfo/fink.info.bak
Modifying package description...
/bin/chmod 644 /sw/fink/dists/local/injected/finkinfo/*.*
Installing package...

/sw/bin/fink install fink-0.37.99.git-20140820.1323
Scanning package description files..........
could not determine XFree86 version number
Information about 9870 packages read in 27 seconds.
WARNING: could not read /sw/fink/10.10/VERSION: No such file or directory
WARNING: unable to determine last selfupdate time. You should run 'fink selfupdate' to get the latest package
descriptions.
Failed: no package found for specification 'fink-0.37.99.git-20140820.1323'!
### execution of /sw/bin/fink failed, exit code 1

Installing the new fink package failed. The description and the tarball were installed, though. You can retry at a
later time by issuing the appropriate fink commands.

Just delete my messages if I should not have sent it to you in the first place.

Thanks,
Jacques
---
Dr. Jacques C.R. Bloch
Institute for Theoretical Physics
University of Regensburg
93040 Regensburg, Germany
tel: +49 941 943-2018
fax: +49 941 943-3887
email: [email protected]
web: http://homepages.uni-regensburg.de/~blj05290



> On 8 Aug 2014, at 13:37, Alexander Hansen <[email protected]> wrote:
> 
> On 8/8/14, 12:50 AM, Jacques Bloch wrote:
>> Dear Alexander,
>> 
>> I moved to Yosemite and can no longer use fink, as it does not support
>> OSX 10.10. Following something that I found on a fink-forum  I added the
>> following lineIn the file /sw/lib/perl5/Fink/Engine.pm:
>> $valid_upgrade = 1 if ($osversion eq "10.10" and $distribution eq "10.9");
>> 
>> However, when I now do "fink selfupdate" I get the error message:
>> /could not determine XFree86 version number
>> /usr/bin/rsync -az -q
>> rsync://distfiles.master.finkmirrors.net/finkinfo//TIMESTAMP
>> /sw/fink/TIMESTAMP.tmp
>> I will now run the rsync command to retrieve the latest package
>> descriptions.
>> /usr/bin/rsync -rtz --delete-after --delete -q   --include='10.10/'
>> --include='10.10/stable/' --include='10.10/stable/main/'
>> --include='10.10/stable/main/finkinfo/'
>> --include='10.10/stable/main/finkinfo/*/'
>> --include='10.10/stable/main/finkinfo/*'
>> --include='10.10/stable/main/finkinfo/**/*' --include='VERSION'
>> --include='DISTRIBUTION' --include='README' --exclude='**'
>> 'rsync://distfiles.master.finkmirrors.net/finkinfo' '/sw/fink/'
>> WARNING: Not saving timestamp of selfupdate because could not write
>> /sw/fink/10.10/VERSION.selfupdate.tmp: No such file or directory
>> Scanning package description files
>> Failed: not a reference at /sw/lib/perl5/Fink/Services.pm line 1885./
>> 
>> Moreover when starting the fink command I always get a message that
>> Xquartz cannot be opened because X11 us not installed, even though other
>> programs can use Xquartz without any problem.
>> 
>> I also tried “fink reinstall fink” and get the error message:
>> /Scanning package description files/
>> /not a reference at /sw/lib/perl5/Fink/Services.pm line 1885./
>> 
>> Do you have any idea how to resolve the problem?
>> 
>> Thanks,
>> Jacques
>> ---
>> Dr. Jacques C.R. Bloch
>> Institute for Theoretical Physics
>> University of Regensburg
>> 93040 Regensburg, Germany
>> tel: +49 941 943-2018
>> fax: +49 941 943-3887
>> email: [email protected] <mailto:[email protected]>
>> web: http://homepages.uni-regensburg.de/~blj05290
>> 
> 
> cc-ing the fink-devel mailing list since Yosemite is in public beta.
> 
> Please don't contact me personally about things like this.  That is why the Fink project has mailing lists.  I'm not personal unpaid technical support.
> 
> The X11 issues are possibly due to your not having the /usr/X11R6 -> /usr/X11 and /usr/X11/ -> /opt/X11 convenience symlinks.   Do you have those?
> 
> Your rsync command isn't working because we have not created a 10.10 directory.  And we may well not do that.
> 
> 
> You _might_ be able to fix fink in place if you download the Yosemite development branch:
> 
> https://github.com/fink/fink/tree/HalfDome
> 
> Download the source zip archive, unpack it, then apply the change change to perlmods/Fink/Engine.pm in that source directory, and then use ./inject.pl to upgrade.  I honestly don't know how well that will work, since I haven't had time to work with Fink on Yosemite.
> -- 
> Alexander Hansen, Ph.D.
> Fink User Liaison
> My package updates: http://finkakh.wordpress.com/

------------------------------------------------------------------------------
Slashdot TV.  
Video for Nerds.  Stuff that matters.
http://tv.slashdot.org/

_______________________________________________
Fink-devel mailing list
[email protected]
List archive:
http://news.gmane.org/gmane.os.apple.fink.devel
Subscription management:
https://lists.sourceforge.net/lists/listinfo/fink-devel