Please do not reply to this email, use the link below.
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001845
--- Comment #4 from Sergei Gavrikov <[email protected]> ---
(In reply to comment #3)
> Hi Sergei,
>
> you need to build the library with a processor clock that is supported in
> can_lpc2xxx_baudrates.h. So you can try a clock of 60Mhz - this is the clock
> I used for building (CYGNUM_HAL_ARM_LPC2XXX_XTAL_FREQ 15000000)
Hi Uwe,
I know this "trick" (I thought that you sent not all diff and you have more
changes under devs/can/arm/lpc2xxx). Thus, user has to replace 14.7456 MHz
oscillator on the board. I recall that such a "repairing" is not issue (the
original oscillator is set on a socket and can be replaced by new one with no
soldering). Well, if nobody has no objections I would apply your patch.
Thanks,
Sergei
--
You are receiving this mail because:
You are on the CC list for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.