Re: shutdown no longer umounts idle USB connected drive.

On 8/23/26 10:55, Christos Margiolis wrote:
> On Sun Aug 23, 2026 at 12:05 AM EEST, Ian FREISLICH wrote:
>> Hi
>>
>> I have a USB connected hard drive which powers down when idle. Recently
>> (in the last 2 weeks or so) shutdown appears to have stopped waiting for
>> the drive to spin up in order to cleanly unmount. I can perform a git
>> bisect but the system is relatively slow so if anyone has a change in
>> mind that might be the culprit, I can start around that point.
>>
>> Ian
> 
> Which driver is it using? Anything showing up in dmesg?
[router] ~ # usbconfig -d ugen0.2 show_ifdrv
ugen0.2: <External SATA Hard Drive Adapter cable PA023U3 Other World 
Computing> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=ON (224mA)
ugen0.2.0: umass0: <ULT-Best Best USB Device, class 0/0, rev 3.00/41.01, 
addr 1>

I started getting these after a kernel built on July 28, but only during 
the cron.daily job:

Jul 31 03:06:53 router kernel: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 
00 43 22 1e 28 00 00 40 00
Jul 31 03:06:53 router kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI 
Status Error
Jul 31 03:06:53 router kernel: (da0:umass-sim0:0:0:0): SCSI status: 
Check Condition
Jul 31 03:06:53 router kernel: (da0:umass-sim0:0:0:0): SCSI sense: 
ABORTED COMMAND asc:47,1 (Data phase CRC error detected)
Jul 31 03:06:53 router kernel: (da0:umass-sim0:0:0:0): Retrying command 
(per sense data)
Jul 31 03:07:01 router kernel: (da0:umass-sim0:0:0:0): READ(10). CDB: 28 
00 43 22 1e 28 00 00 40 00
Jul 31 03:07:01 router kernel: (da0:umass-sim0:0:0:0): CAM status: SCSI 
Status Error
Jul 31 03:07:01 router kernel: (da0:umass-sim0:0:0:0): SCSI status: 
Check Condition
Jul 31 03:07:01 router kernel: (da0:umass-sim0:0:0:0): SCSI sense: NOT 
READY asc:4,1 (Logical unit is in process of becoming ready)
Jul 31 03:07:01 router kernel: (da0:umass-sim0:0:0:0): Polling device 
for readiness

But I now can't reproduce the issue. Oh well.

Ian