Re: RockPro64 with latest image fails to boot?

Emmanuel Vadot <[email protected]>
Newsgroups gmane.os.freebsd.devel.arm
Message-ID <[email protected]> 
 Hi Søren,

On Sat, 1 Aug 2020 10:23:56 +0200
Søren Schmidt <[email protected]> wrote:

> Hi
> 
> Just tried the latest snapshot:
> 
> FreeBSD-13.0-CURRENT-arm64-aarch64-ROCKPRO64-20200730-r363681.img

 Just took the same snapshot and did a 'env default -a' just in case in
u-boot and I'm able to boot correctly with or without an hdmi monitor
attached.

> Copied to a known good SD card, and with a HDMI monitor attached I get the following (Also show on the HDMI monitor btw).
> 
> 
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2020 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT #0 r363681: Thu Jul 30 10:18:20 UTC 2020
>     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> FreeBSD clang version 10.0.1 ([email protected]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT(efifb): resolution 1920x1080
> module firmware already present!
> KLD file umodem.ko is missing dependencies
> real memory  = 4158357504 (3965 MB)
> avail memory = 4023119872 (3836 MB)
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
> random: entropy device external interface
> MAP f0f0e000 mode 2 pages 1
> MAP f0f14000 mode 2 pages 2
> MAP f3f30000 mode 2 pages 16
> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
> kbd0 at kbdmux0
> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
> ofwbus0: <Open Firmware Device Tree>
> clk_fixed0: <Fixed clock> on ofwbus0
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
> 
> Here I just hangs and the display goes black.

 Is it reproducible ? Can you boot -v at loader ?

> Tried again without moinitor attached and got different result, but still failure:
> 
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2020 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT #0 r363681: Thu Jul 30 10:18:20 UTC 2020
>     [email protected]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
> FreeBSD clang version 10.0.1 ([email protected]:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT: init without driver.
> module firmware already present!
> KLD file umodem.ko is missing dependencies
> real memory  = 4158357504 (3965 MB)
> avail memory = 4031209472 (3844 MB)
> Starting CPU 1 (1)
> Starting CPU 2 (2)
> Starting CPU 3 (3)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
> random: entropy device external interface
> MAP f0f0e000 mode 2 pages 1
> MAP f0f14000 mode 2 pages 2
> MAP f3f30000 mode 2 pages 16
> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
> kbd0 at kbdmux0
> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
> ofwbus0: <Open Firmware Device Tree>
> clk_fixed0: <Fixed clock> on ofwbus0
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0
> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0
> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0
> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0
> panic: pmap_kextract: VA out of range, VA: 0xfffffd01e8e13cee
> cpuid = 0
> time = 1
> KDB: stack backtrace:
> db_trace_self() at db_trace_self_wrapper+0x28
> 	 pc = 0xffff000000707738  lr = 0xffff00000010a49c
> 	 sp = 0xffff000000010000  fp = 0xffff000000010200
> 
> db_trace_self_wrapper() at vpanic+0x194
> 	 pc = 0xffff00000010a49c  lr = 0xffff000000427af8
> 	 sp = 0xffff000000010210  fp = 0xffff000000010260
> 
> vpanic() at panic+0x44
> 	 pc = 0xffff000000427af8  lr = 0xffff0000004278a0
> 	 sp = 0xffff000000010270  fp = 0xffff000000010320
> 
> panic() at pmap_kextract+0x140
> 	 pc = 0xffff0000004278a0  lr = 0xffff000000718308
> 	 sp = 0xffff000000010330  fp = 0xffff000000010330
> 
> pmap_kextract() at pmap_fault+0x518
> 	 pc = 0xffff000000718308  lr = 0xffff0000007248c0
> 	 sp = 0xffff000000010340  fp = 0xffff000000010340
> 
> pmap_fault() at data_abort+0xc4
> 	 pc = 0xffff0000007248c0  lr = 0xffff000000727bcc
> 	 sp = 0xffff000000010350  fp = 0xffff0000000103e0
> 
> data_abort() at do_el1h_sync+0x144
> 	 pc = 0xffff000000727bcc  lr = 0xffff000000726fec
> 	 sp = 0xffff0000000103f0  fp = 0xffff000000010430
> 
> do_el1h_sync() at handle_el1h_sync+0x78
> 	 pc = 0xffff000000726fec  lr = 0xffff00000070a078
> 	 sp = 0xffff000000010440  fp = 0xffff000000010580
> 
> handle_el1h_sync() at witness_checkorder+0x52c
> 	 pc = 0xffff00000070a078  lr = 0xffff000000490f04
> 	 sp = 0xffff000000010590  fp = 0xffff000000010630
> 
> witness_checkorder() at witness_checkorder+0x52c
> 	 pc = 0xffff000000490f04  lr = 0xffff000000490f04
> 	 sp = 0xffff000000010640  fp = 0xffff000000010680
> 
> witness_checkorder() at __mtx_lock_flags+0xa8
> 	 pc = 0xffff000000490f04  lr = 0xffff000000404d0c
> 	 sp = 0xffff000000010690  fp = 0xffff0000000106e0
> 
> __mtx_lock_flags() at random_fortuna_process_event+0x2c
> 	 pc = 0xffff000000404d0c  lr = 0xffff0000002367a0
> 	 sp = 0xffff0000000106f0  fp = 0xffff000000010720
> 
> random_fortuna_process_event() at random_harvest_direct_+0x70
> 	 pc = 0xffff0000002367a0  lr = 0xffff000000234e00
> 	 sp = 0xffff000000010730  fp = 0xffff000000010760
> 
> random_harvest_direct_() at device_attach+0x4d8
> 	 pc = 0xffff000000234e00  lr = 0xffff00000045edac
> 	 sp = 0xffff000000010770  fp = 0xffff000000010790
> 
> device_attach() at device_probe_and_attach+0x7c
> 	 pc = 0xffff00000045edac  lr = 0xffff00000045e83c
> 	 sp = 0xffff0000000107a0  fp = 0xffff0000000107f0
> 
> device_probe_and_attach() at bus_generic_attach+0x18
> 	 pc = 0xffff00000045e83c  lr = 0xffff000000460020
> 	 sp = 0xffff000000010800  fp = 0xffff000000010820
> 
> bus_generic_attach() at ofwbus_attach+0x10c
> 	 pc = 0xffff000000460020  lr = 0xffff0000002113c4
> 	 sp = 0xffff000000010830  fp = 0xffff000000010870
> 
> ofwbus_attach() at device_attach+0x400
> 	 pc = 0xffff0000002113c4  lr = 0xffff00000045ecd4
> 	 sp = 0xffff000000010880  fp = 0xffff0000000108c0
> 
> device_attach() at device_probe_and_attach+0x7c
> 	 pc = 0xffff00000045ecd4  lr = 0xffff00000045e83c
> 	 sp = 0xffff0000000108d0  fp = 0xffff000000010920
> 
> device_probe_and_attach() at bus_generic_new_pass+0xf8
> 	 pc = 0xffff00000045e83c  lr = 0xffff000000460a20
> 	 sp = 0xffff000000010930  fp = 0xffff000000010950
> 
> bus_generic_new_pass() at bus_generic_new_pass+0xa8
> 	 pc = 0xffff000000460a20  lr = 0xffff0000004609d0
> 	 sp = 0xffff000000010960  fp = 0xffff000000010990
> 
> bus_generic_new_pass() at bus_set_pass+0x4c
> 	 pc = 0xffff0000004609d0  lr = 0xffff00000045be10
> 	 sp = 0xffff0000000109a0  fp = 0xffff0000000109d0
> 
> bus_set_pass() at mi_startup+0x12c
> 	 pc = 0xffff00000045be10  lr = 0xffff0000003ba2e0
> 	 sp = 0xffff0000000109e0  fp = 0xffff000000010a20
> 
> mi_startup() at virtdone+0x5c
> 	 pc = 0xffff0000003ba2e0  lr = 0xffff00000000108c
> 	 sp = 0xffff000000010a30  fp = 0x0000000000000000
> 
> KDB: enter: panic
> [ thread pid 0 tid 100000 ]
> Stopped at      _isitmyx+0x7c:  ldrb    w10, [x9, x3]
> db> 
> 
> Current used to work for me, something changed during the past month or so (where my last update to -current was done)?.

 Same question as above.

> -Søren
> 

 Thanks,

-- 
Emmanuel Vadot <[email protected]> <[email protected]>
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.