Re: Boot issue with orange pi pc

Emmanuel Vadot писал 2020-08-25 22:15:
> On Tue, 25 Aug 2020 21:37:21 +0400
> Alexander Mishin <[email protected]> wrote:
> 
>> After a last friday's update my OrangePI-PC stop booting.
>> Where to look? Fdt overlay to set the clock for mmc0?
>> 
>> Here's how it ended in the console:
>> 
>> ---- skipped ----
>> Trying to mount root from ufs:/dev/ufs/rootfs [rw,noatime]...
>> uhub4 on usbus5
>> uhub5 on usbus1
>> uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>> usbus5
>> uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>> usbus1
>> Root mount waiting for:ugen6.1: <Generic EHCI root HUB> at usbus6
>> ugen7.1: <Generic OHCI root HUB> at usbus7
>> uhub6 usbus0 on usbus6
>>   usbus1uhub7 usbus2 on usbus7
>>   usbus3uhub6: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 
>> 1>
>> on usbus6
>>   usbus4uhub7: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 
>> 1>
>> on usbus7
>>   usbus5 usbus6 usbus7
>> uhub0: 1 port with 1 removable, self powered
>> uhub4: 1 port with 1 removable, self powered
>> uhub5: 1 port with 1 removable, self powered
>> uhub7: 1 port with 1 removable, self powered
>> mmc0: <MMC/SD bus> on aw_mmc0
>> Cannot set frequency for clk: mmc0, error: 34
>> aw_mmc0: failed to set frequency to 50000000 Hz: 34
>> uhub2: 1 port with 1 removable, self powered
>> uhub1: 1 port with 1 removable, self powered
>> uhub3: 1 port with 1 removable, self powered
>> uhub6: 1 port with 1 removable, self powered
>> mountroot: waiting for device /dev/ufs/rootfs...
>> Mounting from ufs:/dev/ufs/rootfs failed with error 19.
>> 
>> Loader variables:
>>    vfs.root.mountfrom=ufs:/dev/ufs/rootfs
>>    vfs.root.mountfrom.options=rw,noatime
>> 
>> Manual root filesystem specification:
>>    <fstype>:<device> [options]
>>        Mount <device> using filesystem <fstype>
>>        and with the specified (optional) option list.
>> 
>>      eg. ufs:/dev/da0s1a
>>          zfs:zroot/ROOT/default
>>          cd9660:/dev/cd0 ro
>>            (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>> 
>>    ?               List valid disk boot devices
>>    .               Yield 1 second (for background tasks)
>>    <empty line>    Abort manual input
>> 
>> mountroot> aw_mmc0: controller timeout
>> aw_mmc0: timeout resetting DMA/FIFO
>> aw_mmc0: timeout updating clock
>> aw_mmc0: controller timeout
> 
>  What version of FreeBSD ?
>  What revision ?
> 
>  Could you test the GENERICSD image (you just need to add your u-boot).
> 
>  I'll try to find time this week to test myself on H3 board.
> 
I found only image from 13 Aug and it works just fine.
It would be nice to try a new image.

There is a result:

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
     The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r364182: Thu Aug 13 06:32:19 UTC 2020
     [email protected]:/usr/obj/usr/src/arm.armv7/sys/GENERIC 
arm
FreeBSD clang version 10.0.1 ([email protected]:llvm/llvm-project.git 
llvmorg-10.0.1-0-gef32c611aa2)

---- skipped -----

Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
ugen4.1: <Generic EHCI root HUB> at usbus4
uhub2Root mount waiting for: on usbus6
  usbus0uhub3 usbus1 on usbus4
  usbus2uhub2: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> 
on usbus6
  usbus3uhub4 usbus4 on usbus2
  usbus5uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> 
on usbus4
  usbus6uhub4: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> 
on usbus2
  usbus7ugen5.1: <Generic OHCI root HUB> at usbus5
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub5 CAM
  on usbus5
uhub6 on usbus3
uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on 
usbus5
uhub6: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on 
usbus3
ugen7.1: <Generic OHCI root HUB> at usbus7
uhub7 on usbus7
uhub7: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on 
usbus7
uhub1: 1 port with 1 removable, self powered
uhub6: 1 port with 1 removable, self powered
uhub5: 1 port with 1 removable, self powered
uhub7: 1 port with 1 removable, self powered
mmc0: <MMC/SD bus> on aw_mmc0
mmcsd0: 31GB <SDHC SA32G 3.1 SN 27924D76 MFG 10/2017 by 2 TM> at mmc0 
50.0MHz/4bit/32768-block
mmc0: Failed to set VCCQ for card at relative address 4660
uhub0: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
uhub4: 1 port with 1 removable, self powered
mountroot: waiting for device /dev/ufs/rootfs...
Setting hostuuid: d006031e-f668-11de-bc76-6bb4fd8509a3.
Setting hostid: 0xf64aaef0.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 6795243 free (259 frags, 849373 blocks, 0.0% 
fragmentation)
Mounting local filesystems:.

---- skipped ----

Thanks
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "[email protected]"